Request for Comments: 878
Obsoletes RFCs: 851, 802

The ARPANET 1822L Host Access Protocol

RFC 878

Andrew G. Malis

ARPANET Mail: malis@bbn-unix

BBN Communications Corp.

50 Moulton St.

Cambridge, MA 02238

December 1983

     This RFC specifies the ARPANET 1822L Host Access Protocol,  which
     is  a successor to the existing 1822 Host Access Protocol.  1822L
     allows ARPANET hosts to use  logical  names  as  well  as  1822's
     physical port locations to address each other.
     1822L Host Access Protocol                          December 1983
     RFC 878

Table of Contents

     1   INTRODUCTION.......................................... 1
     
     2   THE ARPANET 1822L HOST ACCESS PROTOCOL................ 3
     2.1   Addresses and Names................................. 5
     2.2   Name Translations................................... 7
     2.2.1   Authorization and Effectiveness................... 7
     2.2.2   Translation Policies............................. 11
     2.2.3   Reporting Destination Host Downs................. 13
     2.2.4   1822L and 1822 Interoperability.................. 15
     2.3   Uncontrolled Packets............................... 16
     2.4   Establishing Host-IMP Communications............... 19
     2.5   Counting RFNMs When Using 1822L.................... 20
     2.6   1822L Name Server.................................. 23
     
     3   1822L LEADER FORMATS................................. 25
     3.1   Host-to-IMP 1822L Leader Format.................... 26
     3.2   IMP-to-Host 1822L Leader Format.................... 34
     
     4   REFERENCES........................................... 42
     
     A   1822L-IP ADDRESS MAPPINGS............................ 43

- i -

     1822L Host Access Protocol                          December 1983
     RFC 878

FIGURES

     2.1  1822 Address Format.................................. 5
     2.2  1822L Name Format.................................... 6
     2.3  1822L Address Format................................. 6
     3.1  Host-to-IMP 1822L Leader Format..................... 27
     3.2  NDM Message Format.................................. 30
     3.3  IMP-to-Host 1822L Leader Format..................... 35
     3.4  Name Server Reply Format............................ 38
     A.1  1822 Class A Mapping................................ 44
     A.2  1822L Class A Mapping............................... 44
     A.3  1822L Class B Mapping............................... 45
     A.4  1822L Class C Mapping............................... 46

- ii -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     1  INTRODUCTION
     
     This RFC specifies the ARPANET 1822L Host Access Protocol,  which

will allow hosts to use logical addressing (i.e., host names that

     are independent of their physical location  on  the  ARPANET)  to
     
     communicate  with  each  other.  This new host access protocol is
     
     known as the ARPANET 1822L (for Logical)  Host  Access  Protocol,
     
     and  is  a  successor  to  the  current  ARPANET 1822 Host Access
     
     Protocol, which is described in  sections  3.3  and  3.4  of  BBN
     
     Report  1822  [1].   Although  the  1822L protocol uses different
     
     Host-IMP leaders than the 1822 protocol, the IMPs  will  continue

to support the 1822 protocol, and hosts using either protocol can

     readily communicate with each other (the  IMPs  will  handle  the

translation automatically).

     The RFC's terminology is consistent  with  that  used  in  Report

1822, and any new terms will be defined when they are first used.

     Familiarity  with  Report  1822  (section  3  in  particular)  is
     
     assumed.   As could be expected, the RFC makes many references to

Report 1822. As a result, it uses, as a convenient abbreviation,

"see 1822(x)" instead of "please refer to Report 1822, section x,

for further details".

     This RFC updates, and obsoletes, RFC 851.  The changes from  that

RFC are:

- 1 -

     1822L Host Access Protocol                          December 1983
     RFC 878
  • Section 2.2.4 was rewritten for clarity.
     o Section 2.5 was expanded to  further  discuss  the  effects  of

using 1822L names on host-to-host virtual circuits.

     o In section 3.2, the type 1  IMP-to-host  message  has  two  new
     
       subtypes,  the type 9 message has one new subtype, and the type

15, subtype 4 message is no longer defined.

     o An appendix describing the  mapping  between  1822L  names  and

internet (IP) addresses has been added.

     All of these changes to RFC 851 are marked by revision  bars  (as  |
     
     shown here) in the right margin.                                   |

- 2 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     2  THE ARPANET 1822L HOST ACCESS PROTOCOL
     
     The ARPANET 1822L Host Access  Protocol  allows  a  host  to  use
     
     logical  addressing  to  communicate  with  other  hosts  on  the
     
     ARPANET.  Basically, logical addressing allows hosts to refer  to
     
     each  other  using  an  1822L  name  (see  section  2.1) which is
     
     independent of a host's physical location in  the  network.   IEN
     
     183  (also  published  as  BBN  Report 4473) [2] gives the use of
     
     logical  addressing  considerable   justification.    Among   the

advantages it cites are:

     o The ability to refer to each host on  the  network  by  a  name

independent of its location on the network.

     o Allowing different hosts to share  the  same  host  port  on  a

time-division basis.

     o Allowing a host to use multi-homing (where a single  host  uses

more than one port to communicate with the network).

     o Allowing several hosts that provide the same service  to  share

the same name.

The main differences between the 1822 and 1822L protocols are the

format of the leaders that are used to introduce messages between

     a host and an IMP, and the specification in those leaders of  the
     
     source  and/or  destination  host(s).   Hosts  have the choice of

- 3 -

     1822L Host Access Protocol                          December 1983
     RFC 878

using the 1822 or the 1822L protocol. When a host comes up on an

     IMP,  it  declares  itself to be an 1822 host or an 1822L host by
     
     the type of NOP message (see section  3.1)  it  uses.   Once  up,
     
     hosts  can  switch  from  one protocol to the other by issuing an
     
     appropriate NOP.  Hosts that do not use the 1822L  protocol  will
     
     still  be  addressable by and can communicate with hosts that do,

and vice-versa.

     Another difference between the two protocols  is  that  the  1822

leaders are symmetric, while the 1822L leaders are not. The term

     symmetric means that in the 1822 protocol, the exact same  leader
     
     format  is used for messages in both directions between the hosts
     
     and IMPs.  For example, a leader sent from a host  over  a  cable
     
     that  was  looped  back onto itself (via a looping plug or faulty
     
     hardware) would arrive back at the host and appear to be a  legal
     
     message  from  a  real host (the destination host of the original
     
     message).  In contrast, the 1822L headers are not symmetric,  and
     
     a  host  can  detect  if  the  connection to its IMP is looped by
     
     receiving a message with the wrong leader  format.   This  allows

the host to take appropriate action upon detection of the loop.

- 4 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     2.1  Addresses and Names

The 1822 protocol defines one form of host specification, and the

     1822L  protocol  defines  two additional ways to identify network
     
     hosts.  These three forms are 1822 addresses,  1822L  names,  and

1822L addresses.

     1822 addresses are  the  24-bit  host  addresses  found  in  1822

leaders. They have the following format:

            1              8 9                              24
           +----------------+---------------------------------+
           |                |                                 |
           |  Host number   |           IMP number            |
           |                |                                 |
           +----------------+---------------------------------+

1822 Address Format

Figure 2.1

These fields are quite large, and the ARPANET will never use more

     than  a  fraction of the available address space.  1822 addresses

are used in 1822 leaders only.

     1822L names are 16-bit unsigned numbers that serve as  a  logical
     
     identifier  for  one  or  more  hosts.   1822L  names have a much

simpler format:

- 5 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
                     1                             16
                    +--------------------------------+
                    |                                |
                    |           1822L name           |
                    |                                |
                    +--------------------------------+

1822L Name Format

Figure 2.2

     The 1822L names are just 16-bit  unsigned  numbers,  except  that
     
     bits  1  and  2 are not both zeros (see below).  This allows over

49,000 hosts to be specified.

     1822 addresses cannot be used in 1822L leaders, but there may  be
     
     a  requirement for an 1822L host to be able to address a specific
     
     physical host port or IMP fake host.  1822L  addresses  are  used
     
     for  this  function.   1822L addresses form a subset of the 1822L

name space, and have both bits 1 and 2 off.

                    1   2  3          8 9             16
                  +---+---+------------+----------------+
                  |   |   |            |                |
                  | 0 | 0 |   host #   |   IMP number   |
                  |   |   |            |                |
                  +---+---+------------+----------------+

1822L Address Format

Figure 2.3

- 6 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     This format allows 1822L hosts to directly address hosts 0-63  at
     
     IMPs  1-255  (IMP  0 does not exist).  Note that the highest host
     
     numbers are reserved  for  addressing  the  IMP's  internal  fake
     
     hosts.   At  this  writing, the IMP has seven fake hosts, so host

numbers 57-63 address the IMP fake hosts, while host numbers 0-56

     address  real  hosts  external  to the IMP.  As the number of IMP

fake hosts changes, this boundary point will also change.

     2.2  Name Translations

There are a number of factors that determine how an 1822L name is

     translated  by  the  IMP  into a physical address on the network.

These factors include which translations are legal; in what order

     different  translations  for  the  same name should be attempted;
     
     which  legal  translations  shouldn't  be  attempted  because   a
     
     particular  host  port  is down; and the interoperability between
     
     1822  and  1822L  hosts.   These  issues  are  discussed  in  the

following sections.

     2.2.1  Authorization and Effectiveness
     
     Every host on a C/30 IMP, regardless of whether it is  using  the
     
     1822  or  1822L  protocol  to access the network, can have one or

more 1822L names (logical addresses). Hosts using 1822L can then

- 7 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     use  these  names to address the hosts in the network independent
     
     of their  physical  locations.   Because  of  the  implementation

constraints mentioned in the introduction, hosts on non-C/30 IMPs

     cannot be assigned 1822L names.  To circumvent this  restriction,
     
     however,  1822L  hosts can also use 1822L addresses to access all

of the other hosts.

     At this point, several questions  arise:   How  are  these  names
     
     assigned,  how  do  they  become  known  to  the  IMPs  (so  that
     
     translations to physical addresses can be made), and how  do  the
     
     IMPs know which host is currently using a shared port?  To answer

each question in order:

Names are assigned by a central network administrator. When each

     name  is  created, it is assigned to a host (or a group of hosts)
     
     at one or more specific host ports.  The host(s) are  allowed  to

reside at those specific host ports, and nowhere else. If a host

     moves, it will keep the same name, but the administrator  has  to
     
     update  the  central  database  to  reflect  the  new  host port.
     
     Changes to this database are  distributed  to  the  IMPs  by  the
     
     Network  Operations  Center  (NOC).  For a while, the host may be
     
     allowed to reside at either of (or both) the new and  old  ports.
     
     Once  the  correspondence  between  a  name and one or more hosts
     
     ports where it  may  be  used  has  been  made  official  by  the
     
     administrator,   that  name  is  said  to  be  authorized.  1822L

- 8 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     addresses, which actually  refer  to  physical  host  ports,  are

always authorized in this sense.

     Once a host has been assigned one or more names, it  has  to  let
     
     the  IMPs  know  where it is and what name(s) it is using.  There
     
     are two cases to consider, one for 1822L hosts  and  another  for
     
     1822  hosts.   The following discussion only pertains to hosts on

C/30 IMPs.

     When an IMP sees an 1822L host come up on a host  port,  the  IMP
     
     has  no way of knowing which host has just come up (several hosts
     
     may share the same port, or one host may prefer to  be  known  by
     
     different  names  at different times).  This requires the host to

declare itself to the IMP before it can actually send and receive

     messages.   This  function  is  performed  by  a  new host-to-IMP
     
     message, the Name Declaration  Message  (NDM),  which  lists  the
     
     names  that  the  host would like to be known by.  The IMP checks
     
     its tables to see if each of the names is authorized,  and  sends
     
     an  NDM  Reply  to  the  host  saying  which  names were actually

authorized and can now be used for sending and receiving messages

     (i.e.,  which  names  are  effective). A host can also use an NDM

message to change its list of effective names (it can add to and

     delete  from  the  list) at any time.  The only constraint on the

host is that any names it wishes to use can become effective only

if they are authorized.

- 9 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     In the second case, if a host comes up on a C/30  IMP  using  the
  1. protocol, the IMP automatically makes the first name the IMP
     finds in its tables  for  that  host  become  effective  when  it

receives the first 1822 NOP from the host. Thus, even though the

     host is using the 1822 protocol, it can  still  receive  messages
     
     from  1822L  hosts  via  its  1822L name.  Of course, it can also
     
     receive messages from an 1822L host  via  its  1822L  address  as
     
     well.    (Remember,  the  distinction  between  1822L  names  and
     
     addresses is that the addresses correspond to physical  locations
     
     on   the   network,   while   the   names  are  strictly  logical
     
     identifiers).  The IMPs translate between the  different  leaders

and send the proper leader in each case (see section 2.2.4).

     The third question above has by now already been answered.   When
     
     an  1822L  host comes up, it uses the NDM message to tell the IMP

which host it is (which names it is known by). Even if this is a

shared port, the IMP knows which host is currently connected.

     Whenever a host goes down, its names  automatically  become  non-
     
     effective.   When it comes back up, it has to make them effective

again.

- 10 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     2.2.2  Translation Policies

Several hosts can share the same 1822L name. If more than one of

     these  hosts  is  up  at the same time, any messages sent to that
     
     1822L name will be delivered to just one  of  the  hosts  sharing
     
     that  name,  and  a RFNM will be returned as usual.  However, the
     
     sending host will  not  receive  any  indication  of  which  host
     
     received  the  message,  and subsequent messages to that name are
     
     not guaranteed to be sent to the  same  host.   Typically,  hosts
     
     providing  exactly  the  same  service could share the same 1822L

name in this manner.

     Similarly, when a host is multi-homed, the same  1822L  name  may
     
     refer  to  more  than  one  host  port (all connected to the same
     
     host).  If the host is up on only one of those ports,  that  port

will be used for all messages addressed to the host. However, if

     the host were up on more than one  port,  the  message  would  be
     
     delivered  over  just  one  of  those ports, and the subnet would
     
     choose which port to use.  This port selection could change  from
     
     message  to  message.   If  a  host wanted to insure that certain
     
     messages were delivered to it on specific ports,  these  messages
     
     could  use  either  the  port's 1822L address or a specific 1822L

name that referred to that port alone.

- 11 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     Three different address selection policies are available for  the

name mapping process. When translated, each name uses one of the

     three policies  (the  policy  is  pre-determined  on  a  per-name

basis). The three policies are:

     o  Attempt each translation in the order in  which  the  physical
     
        addresses  are listed in the IMP's translation tables, to find
     
        the first reachable  physical  host  address.   This  list  is
     
        always  searched  from the top whenever an uncontrolled packet
     
        is to be sent or a new virtual circuit connection  has  to  be
     
        created  (see  section  2.5).   This is the most commonly used

policy.

     o  Selection of the closest  physical  address,  which  uses  the
     
        IMP's   routing   tables   to  find  the  translation  to  the
     
        destination  IMP  with  the  least  delay  path  whenever   an
     
        uncontrolled  packet  is  to  be sent or a new virtual circuit

connection has to be created.

     o  Use load leveling. This is similar to the second  policy,  but
     
        differs  in  that  searching  the  address  list  for  a valid

translation starts at the address following where the previous

translation search ended whenever an uncontrolled packet is to

be sent or a new virtual circuit connection has to be created.

        This  attempts to spread out the load from any one IMP's hosts

- 12 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
        to the various host ports associated with a  particular  name.
     
        Note  that this is NOT network-wide load leveling, which would

require a distributed algorithm and tables.

     2.2.3  Reporting Destination Host Downs
     
     As was explained in report 1822, and  as  will  be  discussed  in

greater detail in section 2.5, whenever regular messages are sent

     by a host, the IMP opens a virtual  circuit  connection  to  each
     
     destination  host  from  the source host.  A connection will stay
     
     open at least as long as there are  any  outstanding  (un-RFNMed)
     
     messages  using it and both the source and destination hosts stay

up.

     However, the destination host may go down for some reason  during
     
     the  lifetime of a connection.  If the host goes down while there
     
     are no outstanding messages  to  it  in  the  network,  then  the
     
     connection  is  closed  and  no  other  action is taken until the
     
     source host submits the next message for  that  destination.   At

that time, ONE of the following events will occur:

     A1.  If 1822 or an 1822L address is being  used  to  specify  the

destination host, then the source host will receive a type 7

(Destination Host Dead) message from the IMP.

     A2.  If an 1822L name is being used to  specify  the  destination

- 13 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
          host,  and  the  name maps to only one authorized host port,

then a type 7 message will also be sent to the source host.

     A3.  If an 1822L name is being used to  specify  the  destination
     
          host,  and  the  name  maps to more than one authorized host

port, then the IMP attempts to open a connection to another

          authorized  and  effective  host  port for that name.  If no

such connection can be made, the host will receive a type 15

          (1822L  Name  or  Address  Error),  subtype  5 (no effective

translations) message (see section 3.2). Note that a type 7

          message  cannot be returned to the source host, since type 7
          
          messages refer to a particular destination  host  port,  and

the name maps to more than one destination port.

     Things get a bit more complicated if there  are  any  outstanding
     
     messages  on  the connection when the destination host goes down.
     
     The connection will be closed, and  one  of  the  following  will

occur:

     B1.  If 1822 or an 1822L address is being  used  to  specify  the

destination host, then the source host will receive a type 7

message for each outstanding message.

     B2.  If an 1822L name is being used to  specify  the  destination
     
          host, then the source host will receive a type 9 (Incomplete  |
     
          Transmission), subtype 6  (message  lost  due  to  logically  |
     
          addressed  host  going  down)  message  for each outstanding  |

- 14 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
          message.  The next time  the  source  host  submits  another
     
          message   for  that  same  destination  name,  the  previous

algorithm will be used (either step A2 or step A3).

     The above two algorithms also apply when a  host  stays  up,  but
     
     declares  the  destination  name for an existing connection to no
     
     longer be effective.  In this case, however, the type 7  messages

above will be replaced by type 15, subtype 3 (name not effective)

messages.

     Section 2.3 discusses how destination host downs are handled  for

uncontrolled packets.

     2.2.4  1822L and 1822 Interoperability
     
     As  has  been  previously  stated,  1822  and  1822L  hosts   can
     
     intercommunicate,  and  the  IMPs  will  automatically handle any
     
     necessary leader and address format  conversions.   However,  not
     
     every   combination   of   1822   and  1822L  hosts  allows  full
     
     interoperability with regard to the use  of  1822L  names,  since
  1. hosts are restricted to using physical addresses.
     There are two possible situations where any incompatibility could  |
     
     arise:                                                             |

- 15 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     o  An 1822 host sending a message to an  1822L  host:   The  1822  |
     
        host  specifies the destination host by its 1822 address.  The  |
     
        destination host will receive the message with an 1822L leader  |
     
        containing  the  1822L addresses of the source and destination  |
     
        hosts.                                                          |
     
     o  An 1822L host sending a message to an 1822  host:   The  1822L  |
     
        host  can  use  1822L  names  or addresses to specify both the  |
     
        source and  destination  hosts.   The  destination  host  will  |
     
        receive  the  message  with an 1822 leader containing the 1822  |
     
        address of the source host.                                     |
     
     2.3  Uncontrolled Packets

Uncontrolled packets (see 1822(3.6)) present a unique problem for

     the  1822L protocol.  Uncontrolled packets use none of the normal
     
     ordering and error-control mechanisms in the IMP, and do not  use
     
     the  normal  virtual circuit connection facilities.  As a result,
     
     uncontrolled packets need to carry all  of  their  overhead  with

them, including source and destination names. If 1822L names are

     used when sending an uncontrolled packet, additional  information
     
     is  now required by the subnetwork when the packet is transferred
     
     to the destination IMP.  This means that less  host-to-host  data
     
     can  be  contained  in  the  packet than is possible between 1822

- 16 -

     1822L Host Access Protocol                          December 1983
     RFC 878

hosts.

Uncontrolled packets that are sent between 1822 hosts may contain

     not  more  than  991 bits of data.  Uncontrolled packets that are
     
     sent to and/or from 1822L hosts are limited to 32 bits  less,  or
     
     not  more  than  959  bits.  Packets that exceed this length will
     
     result in an error indication to the host, and  the  packet  will
     
     not  be sent.  This error indication represents an enhancement to
     
     the previous level of service provided by the  IMP,  which  would
     
     simply   discard  an  overly  long  uncontrolled  packet  without

notification.

     Other enhancements that  are  provided  for  uncontrolled  packet
     
     service  are  a  notification  to the host of any errors that are
     
     detected by the host's IMP when it receives the packet.   A  host
     
     will  be  notified if an uncontrolled packet contains an error in
     
     the 1822L  name  specification,  such  as  if  the  name  is  not

authorized or effective, if the remote host is unreachable (which

     is indicated by none of its names being  effective),  if  network

congestion control throttled the packet before it left the source

IMP, or for any other reason the source IMP was not able to send

the packet on its way.

     In most cases, the host will not be notified if the  uncontrolled
     
     packet  was  lost  once  it  was  transmitted  by the source IMP.

- 17 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     However, the IMP will attempt to notify  the  source  host  if  a
     
     logically-addressed  uncontrolled packet was mistakenly sent to a
     
     host that the source IMP thought was effective, but which  turned
     
     out  to  be  dead  or non-effective at the destination IMP.  This
     
     non-delivery notice  is  sent  back  to  the  source  IMP  as  an
     
     uncontrolled  packet from the destination IMP, so the source host

is not guaranteed to receive this indication.

     If the source IMP successfully receives the non-delivery  notice,
     
     then  the  source  host  will  receive  a  type 15 (1822L Name or
     
     Address Error), subtype 6 (down or non-effective  port)  message.
     
     If  the  packet  is  resubmitted or another packet is sent to the
     
     same destination name,  and  there  are  no  available  effective
     
     translations,  then  the  source  host  will  receive  a type 15,
     
     subtype 5 (no effective translations) message if the  destination
     
     name  has  more than one mapping; or will receive either a type 7
     
     (Destination Host Dead)  or  a  type  15,  subtype  3  (name  not
     
     effective)   message   if  the  destination  name  has  a  single

translation.

     Those enhancements to the uncontrolled packet  service  that  are
     
     not  specific  to  logical  addressing will be available to hosts
     
     using 1822 as well as 1822L.  However, uncontrolled packets  must
     
     be  sent  using  1822L leaders in order to receive any indication

that the packet was lost once it has left the source IMP.

- 18 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     2.4  Establishing Host-IMP Communications
     
     When a host comes up on an IMP, or after there has been  a  break
     
     in   the  communications  between  the  host  and  its  IMP  (see

1822(3.2)), the orderly flow of messages between the host and the

     IMP  needs  to  be properly (re)established.  This allows the IMP
     
     and host to recover from most any failure  in  the  other  or  in

their communications path, including a break in mid-message.

     The first messages that a host should send to its IMP  are  three
     
     NOP  messages.   Three  messages  are  required to insure that at

least one message will be properly read by the IMP (the first NOP

could be concatenated to a previous message if communications had

     been broken in mid-stream, and the third provides redundancy  for
     
     the   second).    These   NOPs   serve  several  functions:  they
     
     synchronize the IMP with the host, they tell  the  IMP  how  much
     
     padding  the  host  requires  between  the message leader and its
     
     body, and they also tell the IMP whether the host will  be  using
  1. or 1822L leaders.
     Similarly, the IMP will send three  NOPs  to  the  host  when  it
     
     detects  that  the host has come up.  Actually, the IMP will send
     
     six NOPs, alternating three 1822  NOPs  with  three  1822L  NOPs.

Thus, the host will see three NOPs no matter which protocol it is

     using.   The  NOPs  will  be  followed  by  two  Interface  Reset

- 19 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     messages,  one of each style.  If the IMP receives a NOP from the
     
     host while the above sequence is occurring,  the  IMP  will  only
     
     send  the  remainder  of  the NOPs and the Interface Reset in the

proper style. The 1822 NOPs will contain the 1822 address of the

host interface, and the 1822L NOPs will contain the corresponding

1822L address.

     Once the IMP  and  the  host  have  sent  each  other  the  above

messages, regular communications can commence. See 1822(3.2) for

     further details concerning the ready line,  host  tardiness,  and

other issues.

     2.5  Counting RFNMs When Using 1822L
     
     When a host submits a regular message using an 1822  leader,  the
     
     IMP  checks  for  an  existing simplex virtual circuit connection

(see 1822(3.1)) from the source host to the destination host. If

     such  a  connection already exists, it is used.  Otherwise, a new

connection from the source host port to the destination host port

     is  opened.   In either case, there may be at most eight messages
     
     outstanding on that connection  at  any  one  time.   If  a  host
     
     submits  a  ninth message on that connection before it receives a
     
     reply for the first message, then the host will be blocked  until

the reply is sent for the first message.

- 20 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     Such connections can stay open for some time, but are  timed  out
     
     after  three minutes of no activity, or can be closed if there is
     
     contention for the connection blocks  in  either  the  source  or
     
     destination  IMP.   However, a connection will never be closed as
     
     long as there are any outstanding messages on it.  This allows  a
     
     source  host  to  count the number of replies it has received for

messages to each destination host address in order to avoid being

     blocked   by  submitting  a  ninth  outstanding  message  on  any

connection.

     When a host submits a regular message using an  1822L  leader,  a

similar process occurs, except that in this case, connections are

     distinguished by the  source  port/source  name/destination  name
     
     combination.   When  the message is received from a host, the IMP
     
     first looks for an open connection for that same port and  source
     
     name/destination  name pair.  If such a connection is found, then
     
     it is used, and no further name translation  is  performed.   If,
     
     however,  no open connection was found, then the destination name

is translated, and a connection opened to the physical host port.

     As  long  as there are any outstanding messages on the connection
     
     it will stay open, and it will have  the  same  restriction  that
     
     only  eight messages may be outstanding at any one time.  Thus, a
     
     source host can still count replies to avoid being  blocked,  but

they must be counted on a source port and source name/destination

- 21 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     name pair basis, instead of just by source port  and  destination

host address as before.

     Since connections are based on the source name  as  well  as  the
     
     destination  name,  this  implies that there may be more than one
     
     open connection from physical host port A to physical  host  port
     
     B,   which   would   allow   more  than  8  outstanding  messages
     
     simultaneously from the first to the second port.   However,  for
     
     this  to  occur, either the source or destination names, or both,

must differ from one connection to the next. For example, if the

     names  "543"  and  "677" both translate to physical port 3 on IMP
     
     51, then the host on that port could  open  four  connections  to
     
     itself  by  sending  messages  from "543" to "543", from "543" to

"677", from "677" to "543", and from "677" to "677".

     As has already been stated,  the  destination  names  in  regular
     
     messages  are  only translated when connections are first opened.
     
     Once a connection is open, that connection, and  its  destination
     
     physical  host port, will continue to be used until it is closed.
     
     If, in the meantime, a "better" destination host  port  belonging
     
     to  the  same  destination name became available, it would not be
     
     used until the next time a  new  connection  is  opened  to  that

destination name.

- 22 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     Also, the act of making an 1822L name be non-effective  will  not  |

automatically cause any connections using that name to be closed. |

     However, they will be closed  after  at  most  three  minutes  of  |
     
     inactivity.  A host can, if it wishes, make all of its names at a  |
     
     port be noneffective and close all of its connections to and from  |
     
     the port by flapping the host's ready line to that IMP port.       |
     
     2.6  1822L Name Server
     
     There may  be  times  when  a  host  wants  to  perform  its  own
     
     translations,  or  might need the full list of physical addresses

to which a particular name maps. For example, a connection-based

     host-to-host  protocol  may  require  that the same physical host
     
     port on a multi-homed host be used for all  messages  using  that
     
     host-to-host  connection, and the host does not wish to trust the
     
     IMP to always deliver messages using a destination  name  to  the

same host port.

     In these cases, the host  can  submit  a  type  11  (Name  Server

Request) message to the IMP, which requests the IMP to translate

     the destination 1822L name and return a list of the addresses  to
     
     which  it maps.  The IMP will respond with a type 11 (Name Server
     
     Reply) message, which contains the selection policy  in  use  for
     
     that  name,  the  number of addresses to which the name maps, the

- 23 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     addresses  themselves,  and  for  each  address,  whether  it  is

effective and its routing distance from the IMP. See section 3.2

for a complete description of the message's contents.

     Using this information, the source host could  make  an  informed
     
     decision  on which of the physical host ports corresponding to an

1822L name to use and then send the messages to that port, rather

than to the name.

     The IMP also supports a different type of name service.   A  host
     
     needs  to issue a Name Declaration Message to the IMP in order to
     
     make its names effective, but it may not wish to keep  its  names
     
     in  some table or file in the host.  In this case, it can ask the

IMP to tell it which names it is authorized to use.

     In this case, the host submits a  type  12  (Port  List  Request)

message to the IMP, and the IMP replies with a type 12 (Port List

     Reply) message.  It contains, for the host port  over  which  the
     
     IMP  received the request and sent the reply, the number of names
     
     that map to the port, the list of names, and whether or not  each
     
     name  is  effective.   The  host can then use this information in
     
     order  to  issue  the  Name  Declaration  Message.   Section  3.2

contains a complete description of the reply's contents.

- 24 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     3  1822L LEADER FORMATS
     
     The following sections describe the formats of the  leaders  that
     
     precede  messages  between  an 1822L host and its IMP.  They were
     
     designed to be as compatible with the 1822 leaders  as  possible.
     
     The  second,  fifth,  and  sixth  words  are identical in the two
     
     leaders, and all  of  the  existing  functionality  of  the  1822
     
     leaders  has  been  retained.   In  the  first word, the 1822 New
     
     Format Flag is now also used to identify the two types  of  1822L

leaders, and the Handling Type has been moved to the second byte.

     The third and fourth words contain  the  Source  and  Destination

1822L Name, respectively.

- 25 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     3.1  Host-to-IMP 1822L Leader Format
     
                    1      4 5      8 9             16
                   +--------+--------+----------------+
                   |        |  1822L |                |
                   | Unused |  H2I   | Handling Type  |
                   |        |  Flag  |                |
                   +--------+--------+----------------+
                    17    20 21 22 24 25            32
                   +--------+-+------+----------------+
                   |        |T|Leader|                |
                   | Unused |R|Flags |  Message Type  |
                   |        |C|      |                |
                   +--------+-+------+----------------+
                    33                              48
                   +----------------------------------+
                   |                                  |
                   |           Source Host            |
                   |                                  |
                   +----------------------------------+
                    49                              64
                   +----------------------------------+
                   |                                  |
                   |         Destination Host         |
                   |                                  |
                   +----------------------------------+
                    65                     76 77    80
                   +-------------------------+--------+
                   |                         |        |
                   |       Message ID        |Sub-type|
                   |                         |        |
                   +-------------------------+--------+
                    81                              96
                   +----------------------------------+
                   |                                  |
                   |              Unused              |
                   |                                  |
                   +----------------------------------+

Host-to-IMP 1822L Leader Format

Figure 3.1

- 26 -

     1822L Host Access Protocol                          December 1983
     RFC 878

Bits 1-4: Unused, must be set to zero.

Bits 5-8: 1822L Host-to-IMP Flag:

This field is set to decimal 13 (1101 in binary).

Bits 9-16: Handling Type:

          This  field  is  bit-coded  to  indicate  the   transmission
          
          characteristics  of  the connection desired by the host. See

1822(3.3).

Bit 9: Priority Bit:

               Messages with this bit on will be treated  as  priority

messages.

Bits 10-16: Unused, must be zero.

Bits 17-20: Unused, must be zero.

Bit 21: Trace Bit:

          If equal to one, this message is designated for  tracing  as

it proceeds through the network. See 1822(5.5).

Bits 22-24: Leader Flags:

          Bit 22: A flag available for use by  the  destination  host.

See 1822(3.3) for a description of its use by the IMP's

TTY Fake Host.

Bits 23-24: Reserved for future use, must be zero.

- 27 -

     1822L Host Access Protocol                          December 1983
     RFC 878

Bits 25-32: Message Type:

          Type 0: Regular Message  -  All  host-to-host  communication
          
               occurs  via  regular  messages, which have several sub-

types, found in bits 77-80. These sub-types are:

               0: Standard - The IMP uses its full message  and  error

control facilities, and host blocking may occur.

               3: Uncontrolled  Packet  -  The  IMP  will  perform  no
               
                    message-control   functions   for   this  type  of
               
                    message, and network flow and  congestion  control
               
                    may  cause loss of the packet.  Also see 1822(3.6)

and section 2.3.

1-2,4-15:

Unassigned.

Type 1: Error Without Message ID - See 1822(3.3).

Type 2: Host Going Down - see 1822(3.3).

          Type 3: Name Declaration Message (NDM)  -  This  message  is

used by the host to declare which of its 1822L names is

or is not effective (see section 2.2.1), or to make all

               of  its  names non-effective.  The first 16 bits of the
               
               data portion of the NDM message, following  the  leader
               
               and  any  leader  padding, contains the number of 1822L
               
               names contained in the message.  This  is  followed  by

the 1822L name entries, each 32 bits long, of which the

               first 16 bits is a 1822L name and the  second  16  bits
               
               contains  either  of  the  integers  zero or one.  Zero

- 28 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
               indicates that the name should not  be  effective,  and
     
               one  indicates  that the name should be effective.  The
     
               IMP will reply with a NDM Reply  message  (see  section
     
               3.2)  indicating  which  of the names are now effective
     
               and which are not.  Pictorially, a NDM message has  the
     
               following   format  (including  the  leader,  which  is
     
               printed  in  hexadecimal,  and   without   any   leader

padding):

- 29 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
                 1             16 17            32 33            48
                +----------------+----------------+----------------+
                |                |                |                |
                |      0D00      |      0003      |      0000      |
                |                |                |                |
                +----------------+----------------+----------------+
                 49            64 65            80 81            96
                +----------------+----------------+----------------+
                |                |                |                |
                |      0000      |      0000      |      0000      |
                |                |                |                |
                +----------------+----------------+----------------+
                 97           112 113          128 129          144
                +----------------+----------------+----------------+
                |                |                |                |
                |  # of entries  |  1822L name #1 |     0 or 1     |
                |                |                |                |
                +----------------+----------------+----------------+
                145           160 161          176
                +----------------+----------------+
                |                |                |
                |  1822L name #2 |     0 or 1     |       etc.
                |                |                |
                +----------------+----------------+

NDM Message Format

Figure 3.2

               An  NDM  with  zero  entries  will  cause  all  current

effective names for the host to become non-effective.

          Type 4: NOP - This allows the IMP to  know  which  style  of
          
               leader  the  host wishes to use.  A 1822L NOP signifies
          
               that the host wishes to use 1822L leaders, and an  1822

NOP signifies that the host wishes to use 1822 leaders.

               All of the other remarks concerning the NOP message  in

- 30 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
               1822(3.3)  still  hold.   The  host should always issue
     
               NOPs in groups of three to insure proper  reception  by

the IMP. Also see section 2.4 for a further discussion

on the use of the NOP message.

Type 8: Error with Message ID - see 1822(3.3).

          Type 11: Name Server Request - This allows the host  to  use
          
               the  IMP's  logical addressing tables as a name server.

The destination name in the 1822L leader is translated,

               and  the  IMP replies with a Name Server Reply message,
               
               which lists the physical host addresses  to  which  the

destination name maps.

          Type 12: Port List Request - This allows the  physical  host

to request the list of names that map to the host port

               over which this request was received by the  IMP.   The

IMP replies with a Port List Reply message, which lists

the names that map to the port.

Types 5-7,9-10,13-255: Unassigned.

Bits 33-48: Source Host:

          This field contains one of the  source  host's  1822L  names
          
          (or,  alternatively,  the 1822L address of the host port the
          
          message  is  being  sent   over).    This   field   is   not

automatically filled in by the IMP, as in the 1822 protocol,

          because the host may be known by several names and may  wish

- 31 -

     1822L Host Access Protocol                          December 1983
     RFC 878

to use a particular name as the source of this message. All

          messages from the same host need not use the  same  name  in
          
          this  field.   Each  source  name, when used, is checked for

authorization, effectiveness, and actually belonging to this

host. Messages using names that do not satisfy all of these

          requirements will not be delivered, and will instead  result
          
          in  an  error  message being sent back into the source host.
          
          If the host places its 1822L  address  in  this  field,  the

address is checked to insure that it actually represents the

host port where the message originated.

Bits 49-64: Destination Host:

          This field  contains  the  1822L  name  or  address  of  the
          
          destination  host.   If it contains a name, the name will be

checked for effectiveness, with an error message returned to

the source host if the name is not effective.

Bits 65-76: Message ID:

          This is a host-specified identification used in all  type  0
          
          and  type  8  messages, and is also used in type 2 messages.
          
          When used in type 0 messages, bits 65-72 are also  known  as
          
          the  Link  Field,  and  should  contain  values specified in
          
          Assigned  Numbers  [3]  appropriate  for  the   host-to-host

protocol being used.

- 32 -

     1822L Host Access Protocol                          December 1983
     RFC 878

Bits 77-80: Sub-type:

          This field is used as a modifier by message types 0,  2,  4,

and 8.

Bits 81-96: Unused, must be zero.

- 33 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     3.2  IMP-to-Host 1822L Leader Format
     
                    1      4 5      8 9             16
                   +--------+--------+----------------+
                   |        |  1822L |                |
                   | Unused |  I2H   | Handling Type  |
                   |        |  Flag  |                |
                   +--------+--------+----------------+
                    17    20 21 22 24 25            32
                   +--------+-+------+----------------+
                   |        |T|Leader|                |
                   | Unused |R|Flags |  Message Type  |
                   |        |C|      |                |
                   +--------+-+------+----------------+
                    33                              48
                   +----------------------------------+
                   |                                  |
                   |           Source Host            |
                   |                                  |
                   +----------------------------------+
                    49                              64
                   +----------------------------------+
                   |                                  |
                   |         Destination Host         |
                   |                                  |
                   +----------------------------------+
                    65                     76 77    80
                   +-------------------------+--------+
                   |                         |        |
                   |       Message ID        |Sub-type|
                   |                         |        |
                   +-------------------------+--------+
                    81                              96
                   +----------------------------------+
                   |                                  |
                   |          Message Length          |
                   |                                  |
                   +----------------------------------+

IMP-to-Host 1822L Leader Format

Figure 3.3

- 34 -

     1822L Host Access Protocol                          December 1983
     RFC 878

Bits 1-4: Unused and set to zero.

Bits 5-8: 1822L IMP-to-Host Flag:

This field is set to decimal 14 (1110 in binary).

Bits 9-16: Handling Type:

          This has the value assigned by the source host (see  section
          
          3.1).   This field is only used in message types 0, 5-9, and

Bits 17-20: Unused and set to zero.

Bit 21: Trace Bit:

If equal to one, the source host designated this message for

tracing as it proceeds through the network. See 1822(5.5).

Bits 22-24: Leader Flags:

Bit 22: Available as a destination host flag.

Bits 23-24: Reserved for future use, set to zero.

Bits 25-32: Message Type:

          Type 0: Regular Message  -  All  host-to-host  communication
          
               occurs  via  regular  messages, which have several sub-
          
               types.  The sub-type field (bits 77-80) is the same  as

sent in the host-to-IMP leader (see section 3.1).

          Type 1: Error in Leader - See 1822(3.4).  In addition to its  |
          
               already  defined  sub-types,  this  message has two new  |

- 35 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
               sub-types:                                               |
     
               4: Illegal Leader Style - The host submitted  a  leader  |
     
                    in  which  bits  5-8 did not contain the value 13,  |
     
                    14, or 15 decimal.                                  |
     
               5: Wrong Leader Style - The  host  submitted  an  1822L  |
     
                    leader  when the IMP was expecting an 1822 leader,  |
     
                    or vice-versa.                                      |

Type 2: IMP Going Down - See 1822(3.4).

          Type 3: NDM Reply - This is a reply to the  NDM  host-to-IMP
          
               message  (see  section  3.1).   It  will  have the same
          
               number of entries as the  NDM  message  that  is  being
          
               replying  to,  and  each  listed  1822L  name  will  be
          
               accompanied by a zero or a one  (see  figure  3.2).   A
          
               zero  signifies  that  the name is not effective, and a

one means that the name is now effective.

          Type 4: NOP - The host should discard this message.   It  is
          
               used    during    initialization    of   the   IMP/host

communication. The Destination Host field will contain

               the  1822L  Address of the host port over which the NOP

is being sent. All other fields are unused.

Type 5: Ready for Next Message (RFNM) - See 1822(3.4).

Type 6: Dead Host Status - See 1822(3.4).

          Type 7: Destination Host or IMP  Dead  (or  unknown)  -  See

1822(3.4).

- 36 -

     1822L Host Access Protocol                          December 1983
     RFC 878

Type 8: Error in Data - See 1822(3.4).

          Type  9:  Incomplete  Transmission  -  See  1822(3.4).    In  |
          
               addition to its already defined sub-types, this message  |
          
               has one new sub-type:                                    |
          
               6: Logically Addressed Host Went  Down  -  A  logically  |
          
                    addressed  message was lost in the network because  |
          
                    the  destination  host  to  which  it  was   being  |
          
                    delivered   went  down.   The  message  should  be  |
          
                    resubmitted by the source host, since there may be  |
          
                    another  effective  host port to which the message  |
          
                    could be delivered (see section 2.2.3).             |

Type 10: Interface Reset - See 1822(3.4).

          Type 11: Name Server Reply - This reply to the  Name  Server
          
               Request  host-to-IMP  message  contains,  following the
          
               leader  and  any  leader  padding,  a  word  with   the
          
               selection  policy  and the number of physical addresses
          
               to which the destination name  maps,  followed  by  two
          
               words  per physical address: the first word contains an
          
               1822L address, and  the  second  word  contains  a  bit
          
               signifying  whether  or not that particular translation

is effective and the routing distance (expected network

               transmission  delay,  in 6.4 ms units) to the address's
               
               IMP.  In figure 3.4, which includes the leader  without
               
               any  leader  padding,  EFF is 1 for effective and 0 for

- 37 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
               non-effective, and POL is a two-bit  number  indicating

the selection policy for the name (see section 2.2.2):

0:

First reachable.

1:

Closest physical address.

2:

Load leveling.

3:

Unused.

                 1             16 17            32 33            48
                +----------------+----------------+----------------+
                |                |                |                |
                |      0E00      |      000B      |      0000      |
                |                |                |                |
                +----------------+----------------+----------------+
                 49            64 65            80 81            96
                +----------------+----------------+----------------+
                |                |                |                |
                |   dest. name   |      0000      |      0000      |
                |                |                |                |
                +----------------+----------------+----------------+
                 97           112 113          128 129          144
                +-+--------------+----------------+-+--------------+
                |P|              |                |E|              |
                |O|  # of addrs  |  1822L addr #1 |F| routing dist |
                |L|              |                |F|              |
                +-+--------------+----------------+-+--------------+
                145           160 161          176
                +----------------+-+--------------+
                |                |E|              |
                |  1822L addr #2 |F| routing dist |       etc.
                |                |F|              |
                +----------------+-+--------------+

Name Server Reply Format

Figure 3.4

- 38 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
          Type 12: Port List Reply - This is the  reply  to  the  Port
     
               List  Request  host-to-IMP  message.   It  contains the
     
               number of names that map to this  physical  host  port,

followed by two words per name: the first word contains

               an 1822L name that maps to this port,  and  the  second
               
               contains  either a zero or a one, signifying whether or
               
               not that  particular  translation  is  effective.   The
               
               format  is  identical  to  the type 3 NDM Reply message

(see figure 3.2).

          Type 15: 1822L Name or Address Error - This message is  sent
          
               in  response  to  a  type  0  message  from a host that
          
               contained an erroneous Source Host or Destination  Host

field. Its sub-types are:

               0: The Source Host 1822L name is not authorized or  not

effective.

               1: The Source Host 1822L address  does  not  match  the

host port used to send the message.

2:

The Destination Host 1822L name is not authorized.

               3:  The  physical  host  to  which  this   singly-homed

Destination Host name translated is authorized and

                    up, but not effective.  If the host  was  actually
                    
                    down,  a  type  7 message would be returned, not a

type 15.

5:

The multi-homed Destination Host name is authorized,

- 39 -

     1822L Host Access Protocol                          December 1983
     RFC 878

but has no available effective translations.

               6: A logically-addressed uncontrolled packet  was  sent

to a dead or non-effective host port. However, if

                    it is resubmitted, there may be another  effective
                    
                    host  port to which the IMP may be able to attempt

to send the packet.

7:

Logical addressing is not in use in this network.

8-15:

Unassigned.

Types 4,13-14,16-255: Unassigned.

Bits 33-48: Source Host:

          For type 0 messages, this field contains the 1822L  name  or
          
          address  of  the  host  that  originated  the  message.  All
          
          replies to the message should be sent to the host  specified
          
          herein.   For  message types 5-9 and 15, this field contains

the source host field used in a previous type 0 message sent

by this host.

Bits 49-64: Destination Host:

          For type 0 messages, this field contains the 1822L  name  or
          
          address  that  the  message  was  sent  to.  This allows the
          
          destination host to detect  how  it  was  specified  by  the
          
          source  host.   For  message  types  5-9  and 15, this field
          
          contains the destination host field used in a previous  type
  1. message sent by this host.

- 40 -

     1822L Host Access Protocol                          December 1983
     RFC 878

Bits 65-76: Message ID:

          For message types 0, 5, 7-9,  and  15,  this  is  the  value
          
          assigned  by  the  source  host to identify the message (see
          
          section 3.1).  This field is also used by  message  types  2

and 6.

Bits 77-80: Sub-type:

          This field is used as a modifier by message types 0-2,  5-7,

9, and 15.

Bits 81-96: Message Length:

          This field is contained in type 0, 3, 11,  and  12  messages
          
          only,  and  is  the  actual  length  in  bits of the message
          
          (exclusive of leader, leader padding, and hardware  padding)

as computed by the IMP.

- 41 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     4  REFERENCES
     
     [1]  "Specifications for the Interconnection of  a  Host  and  an

IMP", BBN Report 1822, December 1981 Revision.

     [2]  E.  C.   Rosen   et.   al.,   "ARPANET   Routing   Algorithm

Improvements", Internet Experimenter's Note 183 (also

          published as BBN Report 4473, Vol. 1), August 1980, pp.  55-
     [3]  J. Reynolds and J. Postel, "Assigned Numbers",  Request  For

Comments 870, October 1983, p. 14.

     [4]  J. Postel, ed., "Internet Protocol - DARPA Internet  Program

Protocol Specification", Request for Comments 791, September

     [5]  J. Postel, "Address Mappings",  Request  for  Comments  796,

September 1981.

- 42 -

     1822L Host Access Protocol                          December 1983
     RFC 878

APPENDIX A

1822L-IP ADDRESS MAPPINGS

     Once logical addressing is in active  (or  universal)  use  in  a  |
     
     network,  to  the extent that the "official" host tables for that  |
     
     network specify hosts by their logical names rather than by their  |
     
     physical  network  addresses,  it would be desirable for hosts on  |
     
     other networks to also be able to use the same logical  names  to  |
     
     specify these hosts when sending traffic to them via the internet  |
     
     [4].                                                               |
     
     Happily, there exists a natural mapping between logical names and  |
     
     internet  addresses  that  fits  very  nicely  with  the  already  |
     
     standard ARPANET-style address mapping as specified in  RFC  796,  |
     
     Address  Mappings [5].  The current ARPANET-style class A mapping  |
     
     is as follows (from RFC 796):                                      |

- 43 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
             +--------+ +--------+--------+
             |  HOST  | |  ZERO  |  IMP   |    1822 Address
             +--------+ +--------+--------+
                 8          8        8
     
             +--------+--------+--------+--------+
             | net #  |  HOST  |   LH   |  IMP   |   IP Address
             +--------+--------+--------+--------+
                 8        8        8        8

1822 Class A Mapping

Figure A.1

     For 1822L names and addresses, the mapping would be:               |
     
             +--------+--------+
             | upper  | lower  |     1822L Name or Address
             +--------+--------+
                 8        8
     
             +--------+--------+--------+--------+
             | net #  | upper  |   LH   | lower  |   IP Address
             +--------+--------+--------+--------+
                 8        8        8        8

1822L Class A Mapping

Figure A.2

     For 1822L addresses,  this  mapping  is  identical  to  the  1822  |
     
     mapping.   For  1822L  names,  the  IP address would appear to be  |
     
     addressing a high-numbered (64-255) 1822 host.  Although  the  LH  |
     
     (logical  host)  field  is still defined, its use is discouraged;  |
     
     multiple logical names should now be used to  multiplex  multiple  |

- 44 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     functions onto one physical host port.                             |
     
     This mapping extends to class B networks:                          |
     
             +--------+--------+
             | upper  | lower  |     1822L Name or Address
             +--------+--------+
                 8        8
     
             +----------------+--------+--------+
             | network number | upper  | lower  |   IP Address
             +----------------+--------+--------+
                     16            8        8

1822L Class B Mapping

Figure A.3

     Finally, logical addressing will allow IMP-based class C networks  |
     
     for  the  first  time.   Previously,  it  was very hard to try to  |
     
     divide the 8 bits of host specification into some number of  host  |
     
     bits  and  some  number  of  IMP  bits.   However,  if ALL of the  |
     
     internet-accessible hosts on  the  network  have  logical  names,  |
     
     there is no reason why networks with up to 256 such logical names  |
     
     cannot now use class C addresses, as follows:                      |

- 45 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
             +--------+--------+
             |01000000| lower  |     1822L Name
             +--------+--------+
                 8        8
     
             +------------------------+--------+
             |     network number     | lower  |   IP Address
             +------------------------+--------+
                         24                8

1822L Class C Mapping

Figure A.4

     Those hosts on the network  desiring  internet  access  would  be  |
     
     assigned  logical  names in the range 40000 to 40377 (octal), and  |
     
     the  gateway(s)  connected  to  that  network  would   make   the  |
     
     translation  from IP addresses to 1822L names as specified above.  |
     
     Note that the network could have many more than 256 hosts, or 256  |
     
     defined  names;  the  only  restriction is that hosts that desire  |
     
     internet support or access be addressable by a name in the  range  |
     
     40000  -  40377.   Traffic that was strictly local to the network  |
     
     could use other names or even 1822L addresses.                     |

- 46 -

     1822L Host Access Protocol                          December 1983
     RFC 878

INDEX

     1822...................................................... 3
     1822 address.............................................. 5
     1822 host................................................. 4
     1822L..................................................... 3
     1822L address............................................. 6
     1822L and 1822 interoperability.......................... 15
     1822L host................................................ 4
     1822L name................................................ 5
     address selection policy................................. 12
     authorized................................................ 8
     blocking................................................. 20
     closest physical address................................. 12
     connection............................................... 20
     destination host..................................... 32, 40
     effective............................................. 9, 23
     first reachable.......................................... 12
     handing type......................................... 27, 35
     host downs............................................... 13
     interoperability......................................... 15
     leader flags......................................... 27, 35
     link field............................................... 32
     load leveling............................................ 12
     logical addressing........................................ 3
     message ID........................................... 32, 41
     message length........................................... 41
     message type......................................... 28, 35
     multi-homing.............................................. 3
     name server...................................... 23, 31, 37
     NDM................................................... 9, 28
     NDM reply............................................. 9, 36
     NOC....................................................... 8
     NOP........................................... 4, 19, 30, 36
     priority bit............................................. 27
     regular message...................................... 28, 35
     RFNM................................................. 20, 36
     source host.......................................... 31, 40
     standard message......................................... 28
     sub-type............................................. 33, 41
     symmetric................................................. 4
     trace bit............................................ 27, 35

- 47 -

     1822L Host Access Protocol                          December 1983
     RFC 878
     
     uncontrolled packet.................................. 16, 28
     virtual circuit connection............................... 20

- 48 -