Cisco
G. Keeni
Cyber Solutions
K. Koide
KDDI CORPORATION
K. Nagami
INTEC NetCore
April 2009
Network Mobility (NEMO) Management Information Base
Status of This Memo
-
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
-
Copyright © 2009 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents in effect on the date of publication of this document (http://trustee.ietf.org/license-info). Please review these documents carefully, as they describe your rights and restrictions with respect to this document.
Abstract
-
This memo defines a portion of the Management Information Base (MIB), the Network Mobility (NEMO) support MIB, for use with network management protocols in the Internet community. In particular, the NEMO MIB will be used to monitor and control a Mobile IPv6 node with NEMO functionality.
Table of Contents
-
1. The Internet-Standard Management Framework ......................2 2. Overview ........................................................2 2.1. The Mobile IPv6 Protocol and NEMO Entities .................2 2.2. Relationship to Other MIB Modules ..........................3 2.3. Terminology ................................................3 2.4. MIB Design .................................................3 3. The NEMO MIB ....................................................4 4. IANA Considerations ............................................41 5. Security Considerations ........................................41 6. Acknowledgments ................................................42 7. References .....................................................42 7.1. Normative References ......................................42 7.2. Informative References ....................................43
1. The Internet-Standard Management Framework
-
For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580].
2. Overview
2.1. The Mobile IPv6 Protocol and NEMO Entities
-
Mobile IPv6 (MIPv6) [RFC3775] specifies a protocol that allows nodes to remain reachable while moving around in the IPv6 Internet. The Network Mobility (NEMO) Basic Support Protocol [RFC3963] is an extension to the Mobile IPv6 protocol that facilitates the movement of an entire network. The goals of Network Mobility support and related terminology are discussed in [RFC4886] and [RFC4885], respectively.
Typically, mobile routers implement NEMO functionality for achieving network mobility. However, a mobile router may also function as a mobile node. In the context of this document, an entity that implements the NEMO protocol is a NEMO entity.
This document defines a set of managed objects (MOs) that can be used to monitor and control NEMO entities.
2.2. Relationship to Other MIB Modules
-
This document focuses on the management of a NEMO entity. It is assumed that implementations will support the ifTable from the IF-MIB [RFC2863]. The MOBILEIPV6-MIB [RFC4295] defines the managed objects for a mobile node. Implementations supporting both the mobile node and NEMO functionality SHOULD implement the managed objects defined for the NEMO entities and mobile nodes from both the MOBILEIPV6-MIB and NEMO-MIB. The NEMO-MIB uses the textual conventions defined in the INET-ADDRESS-MIB [RFC4001].
2.3. Terminology
-
The terminology used in this document is consistent with the definitions used in the Mobile IPv6 protocol specification [RFC3775] and the NEMO Basic Support specification [RFC3963].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14, RFC 2119 [RFC2119].
2.4. MIB Design
-
The NEMO MIB comprises the following groups of definitions:
nemoCore: a generic group containing objects that are common to all
-
NEMO entities.
nemoHa: this group models the home agent service. It is composed of
-
objects specific to the services and associated advertisement parameters offered by the home agent on each of its links. It also contains objects pertaining to the maintenance of the home agent list on each of the links on which the service is offered.
nemoMr: this group models the mobile router service. It is composed
-
of objects specific to the Dynamic Home Agent discovery function and related parameters. It also contains objects that record the movement of the mobile router.
nemoNotifications: defines the set of notifications that will be used
-
to asynchronously monitor the NEMO entities.
The tables contained in the above groups are as follows:
nemoBindingCacheTable: models the Binding Cache on the home agent and
-
correspondent node. It contains details of the Binding Update requests that have been received and accepted.
nemoMrEgressIfTable: contains information on the configured egress
-
interfaces.
nemoMrBLTable: models the Binding Update List on the mobile router.
-
It contains information about the registration requests sent by the mobile router and the corresponding results.
nemoHaCounterTable: contains registration statistics for all mobile
-
routers registered with the home agent.
nemoHaMobileNetworkPrefixTable: contains the list of the mobile
-
network prefixes that are maintained by the home agent.
3. The NEMO MIB
-
-
NEMO-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, mib-2, Unsigned32, Counter32, Gauge32, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, DateAndTime, TimeStamp FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF InetAddressType, InetAddress, InetAddressPrefixLength FROM INET-ADDRESS-MIB InterfaceIndex FROM IF-MIB mip6BindingHomeAddressType, mip6BindingHomeAddress, mip6MnBLEntry, mip6BindingCacheEntry, mip6MnBLCOAType, mip6MnBLCOA FROM MOBILEIPV6-MIB ;-
nemoMIB MODULE-IDENTITY
LAST-UPDATED "200903100000Z" -- 10 March 2009 ORGANIZATION "IETF MEXT Working Group"-
-
CONTACT-INFO
-
" Sri Gundavelli Postal: Cisco 170 W.Tasman Drive, San Jose, CA 95134 USA Tel: +1-408-527-6109 Email: sgundave@cisco.com Glenn Mansfield Keeni Postal: Cyber Solutions Inc. 6-6-3, Minami Yoshinari Aoba-ku, Sendai, Japan 989-3204. Tel: +81-22-303-4012 Fax: +81-22-303-4015 E-mail: glenn@cysols.com Kenichi Nagami Postal: INTEC NetCore Inc. 1-3-3, Shin-suna Koto-ku, Tokyo, 135-0075 Japan Tel: +81-3-5665-5069 E-mail: nagami@inetcore.com Kazuhide Koide Postal: KDDI CORPORATION GARDEN AIR TOWER 3-10-10, Iidabashi Chiyoda-ku, Tokyo, 102-8460 Japan Tel: +81-3-6678-3378 E-mail: ka-koide@kddi.com Support Group E-mail: mext@ietf.org "-
-
DESCRIPTION
-
"Copyright © 2009 IETF Trust and the persons identified
-
-
as authors of the code. All rights reserved.
-
-
-
-
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of Internet Society, IETF or IETF Trust, nor the names of specific contributors, may be used to endorse or promote products derived from this software without specific prior written permission.
-
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This version of this MIB module is part of RFC 5488; see the RFC itself for full legal notices."
-
-
REVISION "200903100000Z" -- 10 March 2009 DESCRIPTION "Initial version, published as RFC 5488." ::= { mib-2 184 }-
-- The NEMO MIB has the following primary groups
nemoNotifications OBJECT IDENTIFIER ::= { nemoMIB 0 } nemoObjects OBJECT IDENTIFIER ::= { nemoMIB 1 } nemoConformance OBJECT IDENTIFIER ::= { nemoMIB 2 } nemoCore OBJECT IDENTIFIER ::= { nemoObjects 1 } nemoMr OBJECT IDENTIFIER ::= { nemoObjects 2 } nemoCn OBJECT IDENTIFIER ::= { nemoObjects 3 } nemoHa OBJECT IDENTIFIER ::= { nemoObjects 4 }-
-- The sub groups
nemoSystem OBJECT IDENTIFIER ::= { nemoCore 1 } nemoBindings OBJECT IDENTIFIER ::= { nemoCore 2 } nemoConfiguration OBJECT IDENTIFIER ::= { nemoCore 3 } nemoStats OBJECT IDENTIFIER ::= { nemoCore 4 } nemoMrSystem OBJECT IDENTIFIER ::= { nemoMr 1 } nemoMrConf OBJECT IDENTIFIER ::= { nemoMr 2 } nemoMrRegistration OBJECT IDENTIFIER ::= { nemoMr 3 } nemoMrGlobalStats OBJECT IDENTIFIER ::= { nemoMr 4 } nemoHaAdvertisement OBJECT IDENTIFIER ::= { nemoHa 1 } nemoHaStats OBJECT IDENTIFIER ::= { nemoHa 2 } nemoHaRegistration OBJECT IDENTIFIER ::= { nemoHa 3 } nemoHaGlobalStats OBJECT IDENTIFIER ::= { nemoHaStats 1 } -- Textual Conventions NemoBURequestRejectionCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of the status field in the Binding Acknowledgment message when the Binding Update was rejected for NEMO-specific reasons. " REFERENCE "RFC 3963: Section 4.2" SYNTAX INTEGER { mobileRouterOperationNotPermitted (140), invalidPrefix (141), notAuthorizedForPrefix (142), forwardingSetupFailed (143) } -- -- -- nemoSystem group -- ---
nemoCapabilities OBJECT-TYPE
SYNTAX BITS { mobileRouter (0), homeAgentSupport (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the NEMO functions that are supported by this managed entity. Multiple NEMO functions may be supported by a single entity. " REFERENCE "RFC 3963: Section 3" ::= { nemoSystem 1 }-
nemoStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the NEMO function is enabled for the managed entity. If it is enabled, the agent discovery and registration functions will be operational.-
-
-
-
Changing the status from enabled(1) to disabled(2) will terminate the agent discovery and registration functions. On the other hand, changing the status from disabled(2) to enabled(1) will start the agent discovery and registration functions.
-
-
-
The value of this object MUST remain unchanged across reboots of the managed entity. " ::= { nemoSystem 2 } nemoCounterDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which any one or more of this NEMO entity's counters, viz., counters with OID prefix 'nemoMrConf', 'nemoMrRegnCounters', 'nemoMrGlobalStats', or 'nemoHaGlobalStats', suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object will have a zero value. " ::= { nemoStats 1 } -- -- -- nemoConfiguration group -- --nemoMrBLTable OBJECT-TYPE
SYNTAX SEQUENCE OF NemoMrBLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table corresponds to the Binding Update List (BL) that includes NEMO-related information and that is maintained by the mobile router. The table holds a row for every binding that the mobile router has established or is trying to establish. Entries from the table are deleted as the lifetime of the binding expires. " REFERENCE "RFC 3775: Sections 4.5, 11.1 RFC 3963: Section 5.2" ::= { nemoMrRegistration 1 } nemoMrBLEntry OBJECT-TYPE SYNTAX NemoMrBLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry pertaining to NEMO-related information contained in a Binding Update sent by a NEMO-enabled mobile router to its home agent. " AUGMENTS {mip6MnBLEntry} ::= { nemoMrBLTable 1 } NemoMrBLEntry ::= SEQUENCE { nemoMrBLMode INTEGER, nemoMrBLMrFlag TruthValue, nemoMrBLHomeAddressPrefixLength InetAddressPrefixLength, nemoMrBLCareofAddressPrefixLength InetAddressPrefixLength, nemoMrBLActiveEgressIfIndex InterfaceIndex, nemoMrBLEstablishedHomeTunnelIfIndex InterfaceIndex } nemoMrBLMode OBJECT-TYPE SYNTAX INTEGER { implicitMode (1), explicitMode (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "implicitMode(1): the Mobile Network Prefix Option is not included in the Binding Update by the mobile router. explicitMode(2): the mobile router included one or more Mobile Network Prefix Options in the Binding Update. " REFERENCE "RFC 3963: Section 5.2" ::= { nemoMrBLEntry 1 }nemoMrBLMrFlag OBJECT-TYPE
SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "true(1): the mobile router sent the Binding Update with Mobile Router Flag set. false(2): the mobile router did not send the Binding Update with Mobile Router Flag set. This implies that the mobile router is acting as a mobile node. " REFERENCE "RFC 3963: Sections 4.1, 5.1" ::= { nemoMrBLEntry 2 } nemoMrBLHomeAddressPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length of the mobile router's home network. " REFERENCE "RFC 3963: Section 3" ::= { nemoMrBLEntry 3 } nemoMrBLCareofAddressPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length of the care-of address of the mobile router. " REFERENCE "RFC 3963: Section 3" ::= { nemoMrBLEntry 4 }nemoMrBLActiveEgressIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The interface index of the currently active egress interface. " REFERENCE "RFC 3963: Section 5.5" ::= { nemoMrBLEntry 5 } nemoMrBLEstablishedHomeTunnelIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The interface index of the tunnel established between the mobile router and the home agent for NEMO traffic. " REFERENCE "RFC 3963: Section 5.5" ::= { nemoMrBLEntry 6 }-- Mobile Router Registration Group Counters
nemoMrRegnCounters OBJECT IDENTIFIER ::= { nemoMrRegistration 2 }nemoMrMobilityMessagesSent OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of mobility messages, i.e., IPv6 datagrams with Mobility Header, sent by the mobile node. This will include Binding Updates sent by a mobile router with the Mobile Router Flag set. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3775: Sections 4.2, 6.1 RFC 3963: Section 4.1" ::= { nemoMrRegnCounters 1 }nemoMrMobilityMessagesRecd OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of mobility messages, i.e., IPv6 datagrams with Mobility Header, received by the mobile node. This will include Binding Acknowledgements with Mobile Router Flag set that are sent to a mobile router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3775: Sections 4.2, 6.1 RFC 3963: Sections 4.1, 4.2" ::= { nemoMrRegnCounters 2 }nemoMrPrefixRegMode OBJECT-TYPE
SYNTAX INTEGER { implicitMode (1), explicitMode (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the mode in which the mobile network prefixes will be registered with the home agent.-
-
-
-
implicitMode(1): the Mobile Network Prefix Option will not be included in the Binding Update by the mobile router.
explicitMode(2): the mobile router will include one or more Mobile Network Prefix Options in the Binding Update.
-
-
-
The value of this object MUST remain unchanged across reboots of the managed entity. " REFERENCE "RFC 3963: Section 5.2" ::= { nemoMrRegistration 3 }nemoHaMobileNetworkPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF NemoHaMobileNetworkPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the mobile network prefixes that the home agent maintains for the mobile router. The mobile network prefixes in this table are registered by Binding Updates or are manually pre-configured. " REFERENCE "RFC 3963: Section 6.1.2" ::= { nemoHaRegistration 1 }nemoHaMobileNetworkPrefixEntry OBJECT-TYPE
SYNTAX NemoHaMobileNetworkPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a mobile network prefix.-
-
-
-
The instances of the columnar objects in this entry pertain to an interface for a particular value of mip6BindingHomeAddressType, mip6BindingHomeAddress, and nemoHaMobileNetworkPrefixSeqNo.
The nemoHaMobileNetworkPrefixSeqNo object is used to distinguish between multiple instances of the mobile network prefix in the same Binding Update for the same set of mip6BindingHomeAddressType and mip6BindingHomeAddress.
There is no upper-bound on the maximum number of mobile network prefixes in a Binding Update but, for practical purposes, the upper bound of the value nemoHaMobileNetworkPrefixSeqNo is set to 1024.
-
-
-
Implementers need to be aware that if the total number of octets in mip6BindingHomeAddress exceeds 112, then OIDs of column instances in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. " INDEX { mip6BindingHomeAddressType, mip6BindingHomeAddress, nemoHaMobileNetworkPrefixSeqNo } ::= { nemoHaMobileNetworkPrefixTable 1 } NemoHaMobileNetworkPrefixEntry ::= SEQUENCE { nemoHaMobileNetworkPrefixSeqNo Unsigned32, nemoHaMobileNetworkPrefixType InetAddressType, nemoHaMobileNetworkPrefix InetAddress, nemoHaMobileNetworkPrefixLength Unsigned32, nemoHaMobileNetworkPrefixSource INTEGER }nemoHaMobileNetworkPrefixSeqNo OBJECT-TYPE
SYNTAX Unsigned32 (1..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Binding Update may have multiple mobile network prefixes. This object, along with mip6BindingHomeAddressType and mip6BindingHomeAddress, uniquely identifies a row containing a single mobile network prefix for a mobile router in this table. " REFERENCE "RFC 3963: Sections 2, 6.1, 6.2" ::= { nemoHaMobileNetworkPrefixEntry 1 }nemoHaMobileNetworkPrefixType OBJECT-TYPE
SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type for the mobile network prefix that follows. " ::= { nemoHaMobileNetworkPrefixEntry 2 }nemoHaMobileNetworkPrefix OBJECT-TYPE
SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A mobile network prefix related to the corresponding Binding Update. The type of the address represented by this object is specified by the corresponding nemoHaMobileNetworkPrefixType object. " REFERENCE "RFC 3963: Sections 2, 6.1, 6.2" ::= { nemoHaMobileNetworkPrefixEntry 3 }nemoHaMobileNetworkPrefixLength OBJECT-TYPE
SYNTAX Unsigned32 (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the prefix specified by the corresponding nemoHaMobileNetworkPrefix object. " REFERENCE "RFC 3963: Sections 4.3, 6.1, 6.2" ::= { nemoHaMobileNetworkPrefixEntry 4 }nemoHaMobileNetworkPrefixSource OBJECT-TYPE
SYNTAX INTEGER { configured (1), bindingUpdate (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The information source of the mobile network prefix configured with the Binding Update.-
-
-
-
configured(1): indicates that the mobile network prefix has been manually pre-configured.
bindingUpdate(2): indicates that the information is introduced to the home agent by the Mobile Network
-
-
-
Prefix Option in the Binding Updates received by the home agent. " REFERENCE "RFC 3963: Sections 4.3, 6.1, 6.2" ::= { nemoHaMobileNetworkPrefixEntry 5 }nemoBindingCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF NemoBindingCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table models the Binding Cache that includes NEMO-related information and that is maintained by the home agent. Entries in this table are not required to survive a reboot of the home agent. " REFERENCE "RFC 3775: Sections 4.5, 9.1, 10.1, RFC 3963: Section 6.1" ::= { nemoBindings 1 } nemoBindingCacheEntry OBJECT-TYPE SYNTAX NemoBindingCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional information related to NEMO-enabled entries in the Binding Cache table of the home agent. " AUGMENTS {mip6BindingCacheEntry} ::= { nemoBindingCacheTable 1 }NemoBindingCacheEntry ::= SEQUENCE {
nemoBindingMrFlag TruthValue, nemoBindingMrMode INTEGER }nemoBindingMrFlag OBJECT-TYPE
SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "true(1): indicates that the Binding Cache entry is from an entity acting as a mobile router. false(2): implies that the Binding Cache entry is from an entity acting as a mobile node. " REFERENCE "RFC 3963: Sections 6.1.1, 6.2" ::= { nemoBindingCacheEntry 1 }nemoBindingMrMode OBJECT-TYPE
SYNTAX INTEGER { implicitMode(1), explicitMode(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "implicitMode(1): the Mobile Network Prefix Option is not included in the Binding Update by the mobile router. explicitMode(2): the mobile router included one or more Mobile Network Prefix Options in the Binding Update. " REFERENCE "RFC 3963: Sections 5.2, 6.1.1, 6.2" ::= { nemoBindingCacheEntry 2 } -- -- nemoMrEgressIfTable -- nemoMrEgressIfTable OBJECT-TYPE SYNTAX SEQUENCE OF NemoMrEgressIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table representing the egress interfaces that will be used by the mobile router for roaming to foreign networks. Each entry in this table represents a configured egress interface. " ::= { nemoMrSystem 1 }nemoMrEgressIfEntry OBJECT-TYPE
SYNTAX NemoMrEgressIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the egress interface table. It represents a single egress interface entry. " INDEX { nemoMrEgressIfIndex } ::= { nemoMrEgressIfTable 1 }NemoMrEgressIfEntry ::=
SEQUENCE { nemoMrEgressIfIndex InterfaceIndex, nemoMrEgressIfPriority Unsigned32, nemoMrEgressIfDescription SnmpAdminString, nemoMrEgressIfRoamHoldDownTime Gauge32 } nemoMrEgressIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the interface on the mobile router. " ::= { nemoMrEgressIfEntry 1 } nemoMrEgressIfPriority OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority configured to the egress interface. This value will be configured to a value between 0 and 255. " ::= { nemoMrEgressIfEntry 2 } nemoMrEgressIfDescription OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A human-readable textual description of the egress interface on the mobile router. " ::= { nemoMrEgressIfEntry 3 } nemoMrEgressIfRoamHoldDownTime OBJECT-TYPE SYNTAX Gauge32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the time for which the egress interface will be held down during roaming to avoid interface flapping. " ::= { nemoMrEgressIfEntry 4 }nemoMrDiscoveryRequests OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Modified Dynamic Home Agent Address Discovery Requests, with Mobile Router Support Flag set, sent by the mobile router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3775: Sections 10.5, 11.4.1 RFC 3963: Section 7.1" ::= { nemoMrConf 1 }nemoMrDiscoveryReplies OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Modified Dynamic Home Agent Address Discovery Replies, with Mobile Router Support Flag set, received by the mobile router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3775: Sections 10.5, 11.4.1 RFC 3963: Section 7.2" ::= { nemoMrConf 2 }nemoMrDiscoveryRepliesRouterFlagZero OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Modified Dynamic Home Agent Address Discovery Replies, with Mobile Router Support Flag set to 0 although the flag in the corresponding request is set to 1. It implies that there is no home agent that supports mobile router functionality in the home network. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3775: Sections 10.5, 11.4.1 RFC 3963: Section 7.2" ::= { nemoMrConf 3 }nemoMrMovedHome OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the mobile router has detected movement from a foreign network to its home network. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963: Section 3" ::= { nemoMrConf 4 }nemoMrMovedOutofHome OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the mobile router has detected movement to a foreign network from the home network, has acquired a care-of address, and has initiated the care-of address registration process. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963: Section 3" ::= { nemoMrConf 5 }nemoMrMovedFNtoFN OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the mobile router has detected movement to/from a foreign network from/to another foreign network. Note that 'movement' implies movement in layer 3, i.e., the mobile router's care-of address changed, and it initiated the care-of address registration process.-
-
-
-
If there are multiple egress interfaces, this counter counts the total number of movements. The movement as a mobile node of the mobile entity is not counted.
-
-
-
Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963: Section 3" ::= { nemoMrConf 6 }nemoMrBetterIfDetected OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the NEMO entity has found an egress interface with better priority. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " ::= { nemoMrConf 7 } -- -- nemoStats:nemoMrGlobalStats -- nemoMrBindingAcksWONemoSupport OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Binding Acknowledgements without NEMO support received by the mobile router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963: Section 5.3" ::= { nemoMrGlobalStats 1 } nemoMrBindingAcksRegTypeChangeDisallowed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Binding Acknowledgements received by the mobile router with status code indicating 'Registration type change disallowed' (Code 139). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3775: Section 9.5.1 RFC 3963: Section 6.2" ::= { nemoMrGlobalStats 2 } nemoMrBindingAcksOperationNotPermitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Binding Acknowledgements received by the mobile router with status code-
-
-
-
indicating 'Mobile Router Operation not permitted' (Code 140).
-
-
-
Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963: Section 6.6" ::= { nemoMrGlobalStats 3 } nemoMrBindingAcksInvalidPrefix OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Binding Acknowledgements received by the mobile router with status code indicating 'Invalid Prefix' (Code 141). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963: Section 6.6" ::= { nemoMrGlobalStats 4 }nemoMrBindingAcksNotAuthorizedForPrefix OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Binding Acknowledgements received by the mobile router with status code indicating 'Not Authorized for Prefix' (Code 142). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963 : Section 6.6" ::= { nemoMrGlobalStats 5 }nemoMrBindingAcksForwardingSetupFailed OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Binding Acknowledgements received by the mobile router with status code indicating 'Forwarding Setup failed' (Code 143). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963: Section 6.6" ::= { nemoMrGlobalStats 6 }nemoMrBindingAcksOtherError OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Binding Acknowledgements received by the mobile router (Mobile Router Flag is set) with status code other than: successfully processed --(Code 0 ) mobileRouterOperationNotPermitted (140) --(Code 140) invalidPrefix (141) --(Code 141) notAuthorizedForPrefix (142) --(Code 142) forwardingSetupFailed (143) --(Code 143) Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963 : Section 6.6" ::= { nemoMrGlobalStats 7 } -- -- nemoStats:nemoHaGlobalStats -- nemoHaBUAcksWONemoSupport OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Binding Acknowledgements without NEMO support sent by the home agent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963: Section 5.3" ::= { nemoHaGlobalStats 1 } nemoHaBUAcksRegTypeChangeDisallowed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Binding Update requests rejected by the home agent with status code in the Binding Acknowledgement indicating 'Registration type change disallowed' (Code 139). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3775: Section 9.5.1 RFC 3963: Section 6.2" ::= { nemoHaGlobalStats 2 } nemoHaBUAcksOperationNotPermitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Binding Update requests rejected by the home agent with status code in the Binding Acknowledgement indicating 'Mobile Router Operation not permitted' (Code 140).-
-
-
-
Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of
-
-
-
nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963: Section 6.6" ::= { nemoHaGlobalStats 3 } nemoHaBUAcksInvalidPrefix OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Binding Update requests rejected by the home agent with status code in the Binding Acknowledgement indicating 'Invalid Prefix' (Code 141). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963: Section 6.6" ::= { nemoHaGlobalStats 4 }nemoHaBUAcksNotAuthorizedForPrefix OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Binding Update requests rejected by the home agent with status code in the Binding Acknowledgement indicating 'Not Authorized for Prefix' (Code 142). Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963: Section 6.6" ::= { nemoHaGlobalStats 5 }nemoHaBUAcksForwardingSetupFailed OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current-
DESCRIPTION
-
-
"The total number of Binding Update requests
-
rejected by the home agent with status code in the Binding Acknowledgement indicating 'Forwarding Setup failed' (Code 143).
-
Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963: Section 6.6" ::= { nemoHaGlobalStats 6 }nemoHaBUAcksOtherError OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Binding Update requests from mobile routers (Mobile Router Flag is set) rejected by the home agent with status code other than: mobileRouterOperationNotPermitted (140) invalidPrefix (141) notAuthorizedForPrefix (142) forwardingSetupFailed (143) Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoCounterDiscontinuityTime. " REFERENCE "RFC 3963: Section 6.6" ::= { nemoHaGlobalStats 7 }nemoHaCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF NemoHaCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing registration statistics for all mobile routers registered with the home agent. " ::= { nemoHaStats 2 } nemoHaCounterEntry OBJECT-TYPE SYNTAX NemoHaCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Home agent registration statistics for a mobile router. Implementers need to be aware that if the total number of octets in mip6BindingHomeAddress exceeds 113, then OIDs of column instances in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. " INDEX { mip6BindingHomeAddressType, mip6BindingHomeAddress } ::= { nemoHaCounterTable 1 } NemoHaCounterEntry ::= SEQUENCE { nemoHaBURequestsAccepted Counter32, nemoHaBURequestsDenied Counter32, nemoHaBCEntryCreationTime DateAndTime, nemoHaBUAcceptedTime DateAndTime, nemoHaBURejectionTime DateAndTime, nemoHaRecentBURejectionCode NemoBURequestRejectionCode, nemoHaCtrDiscontinuityTime TimeStamp }nemoHaBURequestsAccepted OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Binding Update requests from the mobile router accepted by the home agent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoHaCtrDiscontinuityTime. " ::= { nemoHaCounterEntry 1 } nemoHaBURequestsDenied OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current-
DESCRIPTION
-
-
"Total number of Binding Update requests from the
-
-
mobile router rejected by the home agent.
-
Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of nemoHaCtrDiscontinuityTime. " ::= { nemoHaCounterEntry 2 } nemoHaBCEntryCreationTime OBJECT-TYPE SYNTAX DateAndTime (SIZE (11)) MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the current Binding Cache entry was created for the mobile router. An implementation MUST return all 11 bytes of the DateAndTime textual-convention so that a manager may retrieve the offset from GMT time. " ::= { nemoHaCounterEntry 3 } nemoHaBUAcceptedTime OBJECT-TYPE SYNTAX DateAndTime (SIZE (11)) MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which the last Binding Update was accepted by the home agent for this mobile router. An implementation MUST return all 11 bytes of the DateAndTime textual-convention so that a manager may retrieve the offset from GMT time. " ::= { nemoHaCounterEntry 4 } nemoHaBURejectionTime OBJECT-TYPE SYNTAX DateAndTime (SIZE (11)) MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which the last Binding Update was rejected by the home agent for this mobile router. If there have been no rejections, then this object will be inaccessible. An implementation MUST return all 11 bytes of the DateAndTime textual-convention so that a manager may retrieve the offset from GMT time. " ::= { nemoHaCounterEntry 5 } nemoHaRecentBURejectionCode OBJECT-TYPE SYNTAX NemoBURequestRejectionCode MAX-ACCESS read-only STATUS current DESCRIPTION "The Status code (>= 128) in the latest Binding Acknowledgment indicating a rejection, sent to this mobile router. If a Binding Update request is rejected and a Binding Acknowledgment is not sent to this mobile router, then this will be the value of the Status code that corresponds to the reason of the rejection. If there have been no Binding Update request rejections, then this object will be inaccessible. " ::= { nemoHaCounterEntry 6 }nemoHaCtrDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which any one or more of the counters in this row, viz., instances of 'nemoHaBURequestsAccepted' and 'nemoHaBURequestsDenied', suffered a discontinuity. If no such discontinuity has occurred since the last re-initialization of the local management subsystem, then this object will have a zero value. " ::= { nemoHaCounterEntry 7 } -- -- -- nemoNotifications -- --nemoHomeTunnelEstablished NOTIFICATION-TYPE
OBJECTS { nemoMrBLActiveEgressIfIndex, nemoMrBLEstablishedHomeTunnelIfIndex, mip6MnBLCOAType, mip6MnBLCOA, nemoMrBLHomeAddressPrefixLength, nemoMrBLCareofAddressPrefixLength } STATUS current DESCRIPTION "This notification is sent by the mobile router every time the tunnel is established between the home agent and the mobile router. " REFERENCE "RFC 3963: Section 5.5" ::= { nemoNotifications 1 }nemoHomeTunnelReleased NOTIFICATION-TYPE
OBJECTS { nemoMrBLActiveEgressIfIndex, nemoMrBLEstablishedHomeTunnelIfIndex, mip6MnBLCOAType, mip6MnBLCOA, nemoMrBLHomeAddressPrefixLength, nemoMrBLCareofAddressPrefixLength } STATUS current DESCRIPTION "This notification is sent by the mobile router every time the tunnel is deleted between the home agent and the mobile router. " REFERENCE "RFC 3963: Section 5.5" ::= { nemoNotifications 2} -- Conformance information nemoGroups OBJECT IDENTIFIER ::= { nemoConformance 1 } nemoCompliances OBJECT IDENTIFIER ::= { nemoConformance 2 } -- Units of conformance nemoSystemGroup OBJECT-GROUP OBJECTS { nemoCapabilities, nemoStatus } STATUS current DESCRIPTION "A collection of objects for basic NEMO monitoring. " ::= { nemoGroups 1 } nemoBindingCacheGroup OBJECT-GROUP OBJECTS { nemoBindingMrFlag, nemoBindingMrMode } STATUS current DESCRIPTION "A collection of objects for monitoring the NEMO extensions of the Binding Cache. " ::= { nemoGroups 2 } nemoStatsGroup OBJECT-GROUP OBJECTS { nemoCounterDiscontinuityTime } STATUS current DESCRIPTION "A collection of objects for monitoring NEMO statistics. " ::= { nemoGroups 3 } nemoMrConfGroup OBJECT-GROUP OBJECTS { nemoMrEgressIfPriority, nemoMrEgressIfDescription, nemoMrEgressIfRoamHoldDownTime, nemoMrDiscoveryRequests, nemoMrDiscoveryReplies, nemoMrDiscoveryRepliesRouterFlagZero, nemoMrMovedHome, nemoMrMovedOutofHome, nemoMrMovedFNtoFN, nemoMrBetterIfDetected } STATUS current DESCRIPTION "A collection of objects for monitoring the configuration-related information on the mobile router. " ::= { nemoGroups 4 } nemoMrRegistrationGroup OBJECT-GROUP OBJECTS { nemoMrBLMode, nemoMrBLMrFlag, nemoMrBLHomeAddressPrefixLength, nemoMrBLCareofAddressPrefixLength, nemoMrBLActiveEgressIfIndex, nemoMrBLEstablishedHomeTunnelIfIndex, nemoMrMobilityMessagesSent, nemoMrMobilityMessagesRecd, nemoMrPrefixRegMode, nemoMrBindingAcksWONemoSupport, nemoMrBindingAcksRegTypeChangeDisallowed, nemoMrBindingAcksOperationNotPermitted, nemoMrBindingAcksInvalidPrefix, nemoMrBindingAcksNotAuthorizedForPrefix, nemoMrBindingAcksForwardingSetupFailed, nemoMrBindingAcksOtherError } STATUS current DESCRIPTION "A collection of objects for monitoring the registration details and statistics for the mobile router. " ::= { nemoGroups 5 } nemoHaSystemGroup OBJECT-GROUP OBJECTS { nemoHaMobileNetworkPrefixType, nemoHaMobileNetworkPrefix, nemoHaMobileNetworkPrefixLength, nemoHaMobileNetworkPrefixSource } STATUS current DESCRIPTION "A collection of objects for basic NEMO configuration monitoring at the home agent. " ::= { nemoGroups 6 } nemoHaStatsGroup OBJECT-GROUP OBJECTS { nemoHaBURequestsAccepted, nemoHaBURequestsDenied, nemoHaBCEntryCreationTime, nemoHaBUAcceptedTime, nemoHaBURejectionTime, nemoHaRecentBURejectionCode, nemoHaCtrDiscontinuityTime } STATUS current DESCRIPTION "A collection of objects for monitoring NEMO registration-related statistics pertaining to the mobile routers registered with the home agent. " ::= { nemoGroups 7 } nemoHaGlobalStatsGroup OBJECT-GROUP OBJECTS { nemoHaBUAcksWONemoSupport, nemoHaBUAcksRegTypeChangeDisallowed, nemoHaBUAcksOperationNotPermitted, nemoHaBUAcksInvalidPrefix, nemoHaBUAcksNotAuthorizedForPrefix, nemoHaBUAcksForwardingSetupFailed, nemoHaBUAcksOtherError } STATUS current DESCRIPTION "A collection of objects for monitoring basic NEMO advertisement and registration statistics on a home agent. " ::= { nemoGroups 8 } nemoNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { nemoHomeTunnelEstablished, nemoHomeTunnelReleased } STATUS current DESCRIPTION "A collection of notifications from a home agent or correspondent node to the manager about the tunnel status of the mobile router. " ::= { nemoGroups 9 } -- Compliance statements nemoCoreCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the NEMO-MIB. " MODULE -- this module MANDATORY-GROUPS { nemoSystemGroup } ::= { nemoCompliances 1 }nemoCompliance2 MODULE-COMPLIANCE
STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the NEMO-MIB and support monitoring of the Binding Cache.-
-
-
-
There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT-clause form in this description:
-
-
-
-- OBJECT mip6BindingHomeAddressType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6BindingHomeAddress -- object. -- -- OBJECT mip6BindingHomeAddress -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6BindingHomeAddress -- object. -- " MODULE -- this module MANDATORY-GROUPS { nemoSystemGroup, nemoBindingCacheGroup } ::= { nemoCompliances 2 }nemoCoreReadOnlyCompliance MODULE-COMPLIANCE
STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the NEMO-MIB without support for read-write (i.e., in read-only mode). " MODULE -- this module MANDATORY-GROUPS { nemoSystemGroup } OBJECT nemoStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { nemoCompliances 3 }nemoReadOnlyCompliance2 MODULE-COMPLIANCE
STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the NEMO-MIB without support for read-write (i.e., in read-only mode) and with support for monitoring of the Binding Cache.-
-
-
-
There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT-clause form in this description:
-
-
-
-- OBJECT mip6BindingHomeAddressType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6BindingHomeAddress -- object. -- -- OBJECT mip6BindingHomeAddress -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6BindingHomeAddress -- object. -- " MODULE -- this module MANDATORY-GROUPS { nemoSystemGroup, nemoBindingCacheGroup } OBJECT nemoStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { nemoCompliances 4 }nemoMrCompliance MODULE-COMPLIANCE
STATUS current DESCRIPTION "The compliance statement for SNMP entities that-
-
-
-
implement the NEMO-MIB for monitoring configuration- related information, registration details, and statistics on a mobile router.
There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT-clause form in this description:
-
-
-
-- OBJECT mip6MnHomeAddressType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6MnHomeAddress -- object. -- -- OBJECT mip6MnHomeAddress -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6MnHomeAddress -- object. -- -- OBJECT mip6MnBLNodeAddressType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6MnBLNodeAddress -- object. -- -- OBJECT mip6MnBLNodeAddress -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6MnBLNodeAddress -- object. " MODULE -- this module MANDATORY-GROUPS { nemoStatsGroup, nemoMrConfGroup, nemoMrRegistrationGroup } ::= { nemoCompliances 5 }nemoMrReadOnlyCompliance2 MODULE-COMPLIANCE
STATUS current DESCRIPTION "The compliance statement for SNMP entities that-
-
-
-
implement the NEMO-MIB without support for read- write (i.e., in read-only mode) and with support for monitoring of configuration-related information, registration details, and statistics on a mobile router.
There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT-clause form in this description:
-
-
-
-- OBJECT mip6MnHomeAddressType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6MnHomeAddress -- object. -- -- OBJECT mip6MnHomeAddress -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6MnHomeAddress -- object. -- -- OBJECT mip6MnBLNodeAddressType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6MnBLNodeAddress -- object. -- -- OBJECT mip6MnBLNodeAddress -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6MnBLNodeAddress -- object. " MODULE -- this module MANDATORY-GROUPS { nemoStatsGroup, nemoMrConfGroup, nemoMrRegistrationGroup } OBJECT nemoMrPrefixRegMode MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { nemoCompliances 6 }nemoHaCoreCompliance MODULE-COMPLIANCE
STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the NEMO-MIB for configuration monitoring at the home agent.-
-
-
-
There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT-clause form in this description:
-
-
-
-- OBJECT mip6BindingHomeAddressType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6BindingHomeAddress -- object. -- -- OBJECT mip6BindingHomeAddress -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6BindingHomeAddress -- object. -- " MODULE -- this module MANDATORY-GROUPS { nemoHaSystemGroup } ::= { nemoCompliances 7 }nemoHaCompliance2 MODULE-COMPLIANCE
STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the NEMO-MIB with support for monitoring of the home agent functionality, specifically the home-agent-registration-related statistics.-
-
-
-
There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT-clause form in this description:
-
-
-
-- OBJECT mip6BindingHomeAddressType -- SYNTAX InetAddressType { ipv6(2) } -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6BindingHomeAddress -- object. -- -- OBJECT mip6BindingHomeAddress -- SYNTAX InetAddress (SIZE(16)) -- DESCRIPTION -- This MIB module requires support for global -- IPv6 addresses for the mip6BindingHomeAddress -- object. -- " MODULE -- this module MANDATORY-GROUPS { nemoHaSystemGroup, nemoHaStatsGroup, nemoHaGlobalStatsGroup } ::= { nemoCompliances 8 }nemoNotificationCompliance MODULE-COMPLIANCE
STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the NEMO-MIB and support Notification from the home agent. " MODULE -- this module MANDATORY-GROUPS { nemoNotificationGroup } ::= { nemoCompliances 9 } END
4. IANA Considerations
-
IANA has assigned a base arc in the mib-2 (Standards Track) OID tree for the 'nemoMIB' (184).
5. Security Considerations
-
There are a number of management objects defined in this MIB module with a MAX-ACCESS clause of read-write. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations. These are the tables and objects and their sensitivity/vulnerability:
nemoStatus: The value of this object is used to enable or disable the
-
NEMO functionality on a NEMO entity. Access to this MO may be abused to disrupt the communication that depends on NEMO.
nemoMrPrefixRegMode: The value of this object is used to control the
-
mode in which mobile network prefixes will be registered with the home agent. Access to this object may be abused to disrupt the setting up of mobile network prefixes.
Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over the network via SNMP. These are the tables and objects and their sensitivity/vulnerability:
nemoHaMobileNetworkPrefixType nemoHaMobileNetworkPrefix
nemoHaMobileNetworkPrefixLength:
-
The above address-related objects may be considered to be particularly sensitive and/or private. The mobile-network- prefix-related objects reveal the configuration of the mobile router and, as such, may be considered to be sensitive.
SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module.
It is RECOMMENDED that implementers consider the security features as provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy).
Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them.
6. Acknowledgments
-
The authors would like to thank Alex Petrescu, Pascal Thubert, Kent Leung, T.J Kniveton, Thierry Ernst, Alberto Garcia, Marcelo Bagnulo, Vijay K. Gurbani, Bert Wijnen, Chris Newman, Dan Romanascu, and Jari Arkko for their review comments on this document.
7. References
7.1. Normative References
-
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [RFC2579] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group MIB", RFC 2863, June 2000. [RFC3775] Johnson, D., Perkins, C., and J. Arkko, "Mobility Support in IPv6", RFC 3775, June 2004.
[RFC3963] Devarapalli, V., Wakikawa, R., Petrescu, A., and P.
-
-
-
Thubert, "Network Mobility (NEMO) Basic Support Protocol", RFC 3963, January 2005.
-
-
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
-
-
-
Schoenwaelder, "Textual Conventions for Internet Network Addresses", RFC 4001, February 2005.
-
-
[RFC4295] Keeni, G., Koide, K., Nagami, K., and S. Gundavelli, "Mobile IPv6 Management Information Base", RFC 4295, April 2006.
7.2. Informative References
-
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet- Standard Management Framework", RFC 3410, December 2002. [RFC4885] Ernst, T. and H-Y. Lach, "Network Mobility Support Terminology", RFC 4885, July 2007. [RFC4886] Ernst, T., "Network Mobility Support Goals and Requirements", RFC 4886, July 2007.
Authors' Addresses
-
Sri Gundavelli Cisco 170 West Tasman Drive San Jose, CA 95134 USA Phone: +1-408-527-6109 EMail: sgundave@cisco.com Glenn Mansfield Keeni Cyber Solutions 6-6-3 Minami Yoshinari, Aoba-ku Sendai 989-3204, Japan Phone: +81-22-303-4012 EMail: glenn@cysols.com Kazuhide Koide KDDI CORPORATION GARDEN AIR TOWER 3-10-10, Iidabashi Chiyoda-ku, Tokyo, 102-8460 Japan Phone: +81-3-6678-3378 EMail: ka-koide@kddi.com Kenichi Nagami INTEC NetCore 1-3-3, Shin-suna Koto-ku, Tokyo, 135-0075, Japan Phone: +81-3-5665-5069 EMail: nagami@inetcore.com