C. Chung
SAIC
M. Greene
Independent Contractor
(Editor)
July 1998
SAIC
M. Greene
Independent Contractor
(Editor)
July 1998
Definitions of Managed Objects for
Multicast over UNI 3.0/3.1 based ATM Networks
Status of this Memo
-
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
-
Copyright © The Internet Society (1998). All Rights Reserved.
Abstract
-
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for IP hosts and routers that use a Multicast Address Resolution Server (MARS) to support IP multicast over ATM, as described in 'Support for Multicast over UNI 3.0/3.1 based ATM Networks' [1].
This memo specifies a MIB module in a manner that is both compliant to the SNMPv2 SMI, and semantically identical to the peer SNMPv1 definitions.
This memo does not specify a standard for the Internet community.
Table of Contents
-
1 The SNMP Network Management Framework ........................ 2 1.1 Object Definitions ......................................... 2 2 Overview ..................................................... 3 2.1 The MARS Client Group ...................................... 4 2.2 The MARS Server Group ...................................... 4 2.3 The MARS Multicast Server Group ............................ 5 3 IP over ATM Multicast Address Resolution Server MIB Definitions ............................................... 6 4 Acknowledgments ..............................................73 5 References ...................................................73 6 Security Considerations ......................................74 7 Authors' Addresses ...........................................75 8 Full Copyright Statement .....................................76
1. The SNMP Network Management Framework
-
The SNMP Network Management Framework presently consists of these components. They are:
o the SMI, described in RFC 1902 [2] - the mechanisms used for describing and naming objects for the purpose of management. o the Textual Conventions, described in RFC 1903 [3] for SNMPv2. o the Conformance Statements, described in RFC 1904 [4] for SNMPv2. o the Simple Network Management Protocol, described in RFC 1157 [5]. o the Protocol Operations, described in RFC 1905 [6] for SNMPv2. o the MIB-II, STD 17, RFC 1213 [7] - the core set of managed objects for the Internet suite of protocols for SNMPv2.
The Framework permits new objects to be defined for the purpose of experimentation and evaluation.
1.1. Object Definitions
-
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the subset of Abstract Syntax Notation One (ASN.1) defined in the SMI. In particular, each object type is named by an OBJECT IDENTIFIER, an administratively assigned name. The object type together with an object instance serves to uniquely identify a specific instantiation of the object. For human convenience, we often use a textual string, termed the descriptor, to also refer to the object type.
2. Overview
-
This MARS MIB is designed to define managed objects that can be used to manage the MARS clients, servers, and the multicast servers (MCS), as described in the RFC2022[1]. The MIB is supposed to be used on a system where one or more MARS clients are running, or where one or more MARS servers are running, or where one or more MARS multicast servers are running.
An understanding of MARS, as defined in [1] is assumed in this MIB module definition. However, the following terms are used frequently and are included here for reference:
Multicast Group
A group of endpoints that communicate with each other such that packets sent from one endpoint are received by all other members of the multicast group.
Multicast Address Resolution Server (MARS)
A server that distributes multicast group membership information to endpoints.
Client/Endpoint
An ATM-attached host or router that registers with a MARS and that is a member of one or more multicast groups. An endpoint may establish ATM Virtual Channels (VCs) to the other group members or may make use of a Multicast Server.
Cluster
The set of clients managed by a MARS.
Multicast Server (MCS)
A server that sets up ATM Virtual Channels (VCs) between endpoints in a multicast group and to which the endpoints forward data traffic for transmission on their behalf.
The MIB is broken down into three major groups: a MARS client group, MARS (server) group, and MARS Multicast Server (MCS) Group.
2.1. The MARS Client Group
-
This client group defines a collection of objects required to be implemented in a MIB for the management of MARS clients. It contains the following tables:
o MARS Client Table
Information about a client such as its ATM address, the ATM address of its default MARS, registration status, and timers.
o MARS Client Multicast Group Table
A list of IP multicast address blocks associated with a MARS client.
o MARS Client Backup MARS Group Table
A list of backup MARS's associated with a MARS client.
o MARS Client VC Table
Information about VCs opened by a client.
o MARS Client Statistics Table
Statistics collected by a MARS client.
2.2. The MARS Server Group
-
This MARS server group defines a collection of objects required to be implemented in a MIB for the management of MARS servers. It contains the following tables:
o MARS Table
Information about a MARS such as its ATM address, its status and timers.
o MARS Multicast Group Table
A list of IP multicast address blocks associated with a MARS.
o MARS VC Table
Information about VCs opened by a MARS.
o MARS Registered Client Table
A list of clients registered with a MARS.
o MARS Registered Multicast Server Table
A list of MCSs registered with a MARS.
o MARS Statistics Table
Statistics collected by a MARS.
o MARS Host Map Table
Mappings between multicast groups and clients maintained by a MARS.
o MARS Server Map Table
Mappings between multicast groups and MCSs maintained by a MARS.
2.3. The MARS Multicast Server Group
-
This MARS multicast server group defines a collection of objects required to be implemented in a MIB for the management of MARS multicast servers. It contains the following tables:
This group contains the following tables:
o MARS Multicast Server Table
Information about a MCS, such as its ATM address, default MARS ATM address, and registration state.
o MARS MCS Multicast Group Table
A list of IP multicast address blocks associated with a MARS MCS.
o MARS MCS Backup Mars Group Table
A list of backup MARS's associated with a MARS MCS.
o MARS Multicast Server VC Table
Information about VCs opened by a MCS.
o MARS Multicast Server Statistics Table
Statistics collected by a MCS.
3. IP Over ATM Multicast Address Resolution Server MIB Definitions
-
IPATM-IPMC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF snmpModules, MODULE-IDENTITY, NOTIFICATION-TYPE, Counter32, Integer32, Unsigned32, OBJECT-TYPE, IpAddress FROM SNMPv2-SMI AtmAddr FROM ATM-TC-MIB TruthValue, RowStatus FROM SNMPv2-TC ipAdEntAddr FROM RFC1213-MIB InterfaceIndex FROM IF-MIB;marsMIB MODULE-IDENTITY
LAST-UPDATED "9804150145Z" -- 15 April 1998 ORGANIZATION "Internetworking Over NBMA (ion) Working Group" CONTACT-INFO " Chris Chung Postal: SAIC 1710 Goodridge Drive Mail Stop 1-4-7 McLean, VA 22102 Tel: +1 703 448 6485 Fax: +1 703 356 2160 E-mail: cchung@tieo.saic.com Editor: Maria Greene Postal: Independent Contractor E-mail: maria@xedia.com " DESCRIPTION "This module defines a portion of the managed information base (MIB) for managing classical IP multicast address resolution server (MARS) and related entities as described in the RFC2022. This MIB is meant to be used in conjunction with the ATM-MIB (RFC1695), MIB-II (RFC1213), and optionally the IF-MIB (RFC1573)." ::= { snmpModules 17 } --*************************************************************** -- IP ATM MARS Client Object Definitions --*************************************************************** marsClientObjects OBJECT IDENTIFIER ::= { marsMIB 1 }marsClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The objects defined in this table are used for the management of MARS clients, ATM attached endpoints." ::= { marsClientObjects 1 }marsClientEntry OBJECT-TYPE
SYNTAX MarsClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains a MARS client and its associated attributes. An entry in the marsClientTable has a corresponding entry in the ipAddrTable defined in RFC1213. Association between the ipAddrTable and the marsClientTable is made through the index, ipAdEntAddr." INDEX { ipAdEntAddr, marsClientIndex } ::= { marsClientTable 1 }MarsClientEntry ::=
SEQUENCE { marsClientIndex Integer32, marsClientAddr AtmAddr, marsClientDefaultMarsAddr AtmAddr, marsClientHsn Unsigned32, marsClientRegistration INTEGER, marsClientCmi INTEGER, marsClientDefaultMtu INTEGER, marsClientFailureTimer INTEGER, marsClientRetranDelayTimer INTEGER, marsClientRdmMulReqAddRetrTimer INTEGER, marsClientRdmVcRevalidateTimer INTEGER, marsClientJoinLeaveRetrInterval INTEGER, marsClientJoinLeaveRetrLimit INTEGER, marsClientRegWithMarsRdmTimer INTEGER, marsClientForceWaitTimer INTEGER, marsClientLmtToMissRedirMapTimer INTEGER, marsClientIdleTimer INTEGER, marsClientRowStatus RowStatus }marsClientIndex OBJECT-TYPE
SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used to identify instances of the columnar objects in the MARS MarsClientTable." ::= { marsClientEntry 1 }marsClientAddr OBJECT-TYPE
SYNTAX AtmAddr MAX-ACCESS read-create STATUS current DESCRIPTION "The ATM address associated with the ATM Client." ::= { marsClientEntry 2 }marsClientDefaultMarsAddr OBJECT-TYPE
SYNTAX AtmAddr MAX-ACCESS read-create STATUS current DESCRIPTION "The default MARS ATM address which is needed to setup the initial signalling path between a MARS client and its associated MARS." ::= { marsClientEntry 3 }marsClientHsn OBJECT-TYPE
SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The cluster membership own 32 bit Host Sequence Number. When a new cluster member starts up, it is initialized to zero. When the cluster member sends the MARS_JOIN to register, the HSN will be correctly set to the current cluster sequence number (CSN) when the Client receives the copy of its MARS_JOIN from the MARS. It is is used to track the MARS sequence number." ::= { marsClientEntry 4 }marsClientRegistration OBJECT-TYPE
SYNTAX INTEGER { notRegistered (1), registering (2), registered (3), reRegisteringFault (4), reRegisteringRedirMap (5) } MAX-ACCESS read-create STATUS current DESCRIPTION "An indication with regards to the registration status of this client. The registration codes of 'notRegistered (1)', 'registered (2)', and registered (3) are self-explanatory. The 'reRegisteringFault (4)' indicates the client is in the process of re-registering with a MARS due to some fault conditions. The 'reRegisteringRedMap (5)' status code shows that client is re-registering because it has received a MARS_REDIRECT_MAP message and was told to register with a different MARS from the current MARS." ::= { marsClientEntry 5 }marsClientCmi OBJECT-TYPE
SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "16 bit Cluster member identifier (CMI) assigned by the MARS which uniquely identifies each endpoint attached to the cluster. The value becomes valid after the 'marsClientRegistration' is set to the value of 'registered (1)'." ::= { marsClientEntry 6 }marsClientDefaultMtu OBJECT-TYPE
SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The default maximum transmission unit (MTU) used for this cluster. Note that the actual size used for a VC between two members of the cluster may be negotiated during connection setup and may be different than this value. Default value = 9180 bytes." DEFVAL { 9180 } ::= { marsClientEntry 7 }marsClientFailureTimer OBJECT-TYPE
SYNTAX INTEGER (1..2147483647) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A timer used to flag the failure of last MARS_MULTI to arrive. Default value = 10 seconds (recommended)." DEFVAL { 10 } ::= { marsClientEntry 8 }marsClientRetranDelayTimer OBJECT-TYPE
SYNTAX INTEGER (5..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The delay timer for sending out new MARS_REQUEST for the group after the client learned that there is no other group in the cluster. The timer must be set between 5 and 10 seconds inclusive." ::= { marsClientEntry 9 }marsClientRdmMulReqAddRetrTimer OBJECT-TYPE
SYNTAX INTEGER (5..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The initial random L_MULTI_RQ/ADD retransmit timer which can be set between 5 and 10 seconds inclusive." ::= { marsClientEntry 10 }marsClientRdmVcRevalidateTimer OBJECT-TYPE
SYNTAX INTEGER (1..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The random time to set VC_revalidate flag. The timer value ranges between 1 and 10 seconds inclusive." ::= { marsClientEntry 11 }marsClientJoinLeaveRetrInterval OBJECT-TYPE
SYNTAX INTEGER(5..2147483647) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "MARS_JOIN/LEAVE retransmit interval. The minimum and recommended values are 5 and 10 seconds, respectively." DEFVAL { 10 } ::= { marsClientEntry 12 }marsClientJoinLeaveRetrLimit OBJECT-TYPE
SYNTAX INTEGER (0..5) MAX-ACCESS read-create STATUS current DESCRIPTION "MARS_JOIN/LEAVE retransmit limit. The maximum value is 5." ::= { marsClientEntry 13 }marsClientRegWithMarsRdmTimer OBJECT-TYPE
SYNTAX INTEGER (1..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Random time to register with MARS." ::= { marsClientEntry 14 }marsClientForceWaitTimer OBJECT-TYPE
SYNTAX INTEGER (1..2147483647) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "Force wait if MARS re-registration is looping. The minimum value is 1 minute." ::= { marsClientEntry 15 }marsClientLmtToMissRedirMapTimer OBJECT-TYPE
SYNTAX INTEGER (1..4) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Timer limit for client to miss MARS_REDIRECT_MAPS." ::= { marsClientEntry 16 }marsClientIdleTimer OBJECT-TYPE
SYNTAX INTEGER (1..2147483647) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The configurable inactivity timer associated with a client. When a VC is created at this client, it gets the idle timer value from this configurable timer. The minimum suggested value is 1 minute and the recommended default value is 20 minutes." DEFVAL { 20 } ::= { marsClientEntry 17 }marsClientRowStatus OBJECT-TYPE
SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to create, delete or modify a row in this table.-
-
A row cannot be made 'active' until instances of all corresponding columns in the row of this table are appropriately configured and until the agent
has also created a corresponding row in the marsClientStatTable.
-
When this object has a value of 'active', the
following columnar objects can not be modified:
-
marsClientDefaultMarsAddr, marsClientHsn, marsClientRegstration, marsClientCmi, marsClientDefaultMtu
while other objects in this conceptual row can be
modified irrespective of the value of this object.
-
Deletion of this row is allowed regardless of whether or not a row in any associated tables (i.e., marsClientVcTable) still exists or is in use. Once this row is deleted, it is recommended that the agent or the SNMP management station (if possible) through the set command deletes any stale rows that are associated with this row." ::= { marsClientEntry 18 } --**************************************************************** -- IP ATM MARS Client Multicast Group Address Object Definitions --****************************************************************marsClientMcGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsClientMcGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of IP multicast group address blocks associated with a MARS client. Entries in this table are used by the client that needs to receive or transmit packets from/to the specified range of multicast addresses. Each row can be created or deleted via configuration." ::= { marsClientObjects 2 }marsClientMcGrpEntry OBJECT-TYPE
SYNTAX MarsClientMcGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a consecutive block of multicast group addresses." INDEX { ipAdEntAddr, marsClientIndex, marsClientMcMinGrpAddr, marsClientMcMaxGrpAddr } ::= { marsClientMcGrpTable 1 }MarsClientMcGrpEntry ::=
SEQUENCE { marsClientMcMinGrpAddr IpAddress, marsClientMcMaxGrpAddr IpAddress, marsClientMcGrpRowStatus RowStatus }marsClientMcMinGrpAddr OBJECT-TYPE
SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Minimum multicast group address - the min and max multicast forms multi-group block. If the MinGrpAddr and MaxGrpAddr are the same, it indicates that this block contains a single group address." ::= { marsClientMcGrpEntry 1 }marsClientMcMaxGrpAddr OBJECT-TYPE
SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Maximum multicast group address - the min and max multicast forms a multi-group block. If the MinGrpAddr and MaxGrpAddr are the same, it indicates that this block contains a single group address." ::= { marsClientMcGrpEntry 2 }marsClientMcGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to create or delete a row in this table. Since other objects in this row are not-accessible 'index-objects', the value of this object has no effect on whether those objects in this conceptual row can be modified." ::= { marsClientMcGrpEntry 3 } --**************************************************************** -- IP ATM MARS Client Backup MARS Object Definitions --****************************************************************marsClientBackupMarsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsClientBackupMarsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of backup MARS addresses that a client can connect to in case of failure for connecting to the primary server. The list of addresses is in descending order of preference. It should be noted that the backup list provided by the MARS to the client via the MARS_REDIRECT_MAP message has a higher preference than addresses that are manually configured into the client. When such a list is received from the MARS, this information should be inserted at the top of the list. Each row can be created or deleted via configuration." ::= { marsClientObjects 3 }marsClientBackupMarsEntry OBJECT-TYPE
SYNTAX MarsClientBackupMarsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents an ATM address of a backup MARS." INDEX { ipAdEntAddr, marsClientIndex, marsClientBackupMarsPriority, marsClientBackupMarsAddr } ::= { marsClientBackupMarsTable 1 }MarsClientBackupMarsEntry ::=
SEQUENCE { marsClientBackupMarsPriority Unsigned32, marsClientBackupMarsAddr AtmAddr, marsClientBackupMarsRowStatus RowStatus }marsClientBackupMarsPriority OBJECT-TYPE
SYNTAX Unsigned32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority associated with a backup MARS. A lower priority value inidcates a higher preference." ::= { marsClientBackupMarsEntry 1 }marsClientBackupMarsAddr OBJECT-TYPE
SYNTAX AtmAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ATM address associated with a backup MARS." ::= { marsClientBackupMarsEntry 2 }marsClientBackupMarsRowStatus OBJECT-TYPE
SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to create or delete a row in this table. Since other objects in this row are not-accessible 'index-objects', the value of this object has no effect on whether those objects in this conceptual row can be modified." ::= { marsClientBackupMarsEntry 3 } --*************************************************************** -- IP ATM MARS Client VC Object Definition Table --***************************************************************marsClientVcTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsClientVcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about open virtual circuits (VCs) that a client has. For point to point circuit, each entry represents a single VC connection between this client ATM address to another party ATM address. In the case of point to multipoint connection where a single source address is associated with multiple destinations, several entries are used to represent the relationship. An example of point to multi-point VC represented in a table is shown below. Client VPI/VCI Grp Addr1/Addr2 Part Addr 1 0,1 g1,g2 p1 1 0,1 g1,g2 p2 1 0,1 g1,g2 p3 Note: This table assumes the IP multicast address groups (min, max) defined in each entry are always consecutive. In the case of that a client receives a JOIN/LEAVE with mars$flag.punched set, each pair of the IP groups will first be broken into several pairs of consecutive IP groups before each entry row corresponding to a pair of IP group is created." ::= { marsClientObjects 4 }marsClientVcEntry OBJECT-TYPE
SYNTAX MarsClientVcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The objects contained in the entry are VC related attributes such as VC signalling type, control VC type, idle timer, negotiated MTU size, etc." INDEX { ipAdEntAddr, marsClientIndex, marsClientVcVpi, marsClientVcVci, marsClientVcMinGrpAddr, marsClientVcMaxGrpAddr, marsClientVcPartyAddr } ::= { marsClientVcTable 1 }MarsClientVcEntry ::=
SEQUENCE { marsClientVcVpi INTEGER, marsClientVcVci INTEGER, marsClientVcMinGrpAddr IpAddress, marsClientVcMaxGrpAddr IpAddress, marsClientVcPartyAddr AtmAddr, marsClientVcPartyAddrType INTEGER, marsClientVcType INTEGER, marsClientVcCtrlType INTEGER, marsClientVcIdleTimer INTEGER, marsClientVcRevalidate TruthValue, marsClientVcEncapsType INTEGER, marsClientVcNegotiatedMtu INTEGER, marsClientVcRowStatus RowStatus }marsClientVcVpi OBJECT-TYPE
SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of virtual path identifier (VPI). Since a VPI can be numbered 0, this sub-index can take a value of 0." ::= { marsClientVcEntry 1 }marsClientVcVci OBJECT-TYPE
SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of virtual circuit identifier (VCI). Since a VCI can be numbered 0, this sub-index can take a value of 0." ::= { marsClientVcEntry 2 }marsClientVcMinGrpAddr OBJECT-TYPE
SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Minimum IP multicast group address - the min and max multicast forms a multi-group consecutive block which is associated with a table entry. if the MinGrpAddr and MaxGrpAddr are the same, it indicates that the size of multi-group block is 1, a single IP group." ::= { marsClientVcEntry 3 }marsClientVcMaxGrpAddr OBJECT-TYPE
SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Maximum IP multicast group address - the min and max multicast forms a multi-group consecutive block which is associated with a table entry. if the MinGrpAddr and MaxGrpAddr are the same, it indicates that the size of multi-group block is 1, a single IP group." ::= { marsClientVcEntry 4 }marsClientVcPartyAddr OBJECT-TYPE
SYNTAX AtmAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "An ATM party address in which this VC is linked. The party type is identified by the marsClientVcPartyAddrType." ::= { marsClientVcEntry 5 }marsClientVcPartyAddrType OBJECT-TYPE
SYNTAX INTEGER { called (1), calling (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The party type is associated with the party address. The 'called (1)' indicates that the party address is a destination address which implies that VC is originated from this client. The 'calling (2)' indicates the VC was initiated externally to this client. In this case, the party address is the source address." ::= { marsClientVcEntry 6 }marsClientVcType OBJECT-TYPE
SYNTAX INTEGER { pvc (1), svc (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Circuit Connection type: permanent virtual circuit or switched virtual circuit." ::= { marsClientVcEntry 7 }marsClientVcCtrlType OBJECT-TYPE
SYNTAX INTEGER { pointToPointVC (1), clusterControlVC (2), pointToMultiPointVC (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Control VC type used to specify a particular connection. pointToPointVC (1): used by the ATM Clients for the registration and queries. This VC or the initial signalling path is set up from the source Client to a MARS. It is bi-directional. clusterControlVC (2): used by a MARS to issue asynchronous updates to an ATM Client. This VC is established from the MARS to the ATM Client. pointToMultiPointVC (3): used by the client to transfer multicast data packets from layer 3. This VC is established from the source ATM Client to a destination ATM endpoint which can be a multicast group member or an MCS. The destination endpoint was obtained from the MARS." ::= { marsClientVcEntry 8 }marsClientVcIdleTimer OBJECT-TYPE
SYNTAX INTEGER (1..2147483647) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The idle timer associated with this VC. The minimum suggested value is 1 minute and the recommended default value is 20 minutes." DEFVAL { 20 } ::= { marsClientVcEntry 9 }marsClientVcRevalidate OBJECT-TYPE
SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A flag associated with an open and active multipoint VC. It is checked every time a packet is queued for transmission on that VC. The object has the value of true (1) if revalidate is required and the value false (2) otherwise." ::= { marsClientVcEntry 10 }marsClientVcEncapsType OBJECT-TYPE
SYNTAX INTEGER { other (1), llcSnap (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The encapsulation type used when communicating over this VC." ::= { marsClientVcEntry 11 }marsClientVcNegotiatedMtu OBJECT-TYPE
SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The negotiated MTU when communicating over this VC." ::= { marsClientVcEntry 12 }marsClientVcRowStatus OBJECT-TYPE
SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to create, delete or modify a row in this table.
A row cannot be made 'active' until instances of
all corresponding columns in the row of this table
are appropriately configured.
-
-
-
While objects: marsClientVcIdleTimer and marsClientVcRevalidate in this conceptual
row can be modified irrespective of the value
of this object, all other objects in the row can
not be modified when this object has a value
of 'active'.It is possible for an SNMP management station
to set the row to 'notInService' and modify
the entry and then set it back to 'active'
-
with the following exception. That is, rows for which the corresponding instance of marsClientVcType has a value of 'svc' can not be modified or deleted." ::= { marsClientVcEntry 13 } --*************************************************************** -- IP ATM MARS Client Statistic Object Definition Table --***************************************************************marsClientStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsClientStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains statistics collected at MARS clients." ::= { marsClientObjects 5 }marsClientStatEntry OBJECT-TYPE
SYNTAX MarsClientStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains statistics collected at one MARS client." INDEX { ipAdEntAddr, marsClientIndex } ::= { marsClientStatTable 1 }MarsClientStatEntry ::=
-
SEQUENCE {
marsClientStatTxReqMsgs Counter32, marsClientStatTxJoinMsgs Counter32, marsClientStatTxLeaveMsgs Counter32, marsClientStatTxGrpLstReqMsgs Counter32, marsClientStatRxJoinMsgs Counter32, marsClientStatRxLeaveMsgs Counter32, marsClientStatRxMultiMsgs Counter32, marsClientStatRxNakMsgs Counter32, marsClientStatRxMigrateMsgs Counter32, marsClientStatRxGrpLstRplyMsgs Counter32, marsClientStatFailMultiMsgs Counter32 }marsClientStatTxReqMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_REQUEST messages transmitted from a client." ::= { marsClientStatEntry 1 }marsClientStatTxJoinMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_JOIN messages transmitted from a client." ::= { marsClientStatEntry 2 }marsClientStatTxLeaveMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_LEAVE messages transmitted from a client." ::= { marsClientStatEntry 3 }marsClientStatTxGrpLstReqMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_GROUPLIST_REQUEST messages transmitted from a client." ::= { marsClientStatEntry 4 }marsClientStatRxJoinMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_JOIN messages received by a client." ::= { marsClientStatEntry 5 }marsClientStatRxLeaveMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_LEAVE messages received by a client." ::= { marsClientStatEntry 6 }marsClientStatRxMultiMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_MULTI messages received by a client." ::= { marsClientStatEntry 7 }marsClientStatRxNakMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_NAK messages received by a client." ::= { marsClientStatEntry 8 }marsClientStatRxMigrateMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_MIGRATE messages received by a client." ::= { marsClientStatEntry 9 } marsClientStatRxGrpLstRplyMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_GROUPLIST_REPLY messages received by a client." ::= { marsClientStatEntry 10 }marsClientStatFailMultiMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of timeouts occurred indicating failure of the last MARS_MULTI to arrive." ::= { marsClientStatEntry 11 } --*************************************************************** -- IP ATM MARS Object Definitions --*************************************************************** marsObjects OBJECT IDENTIFIER ::= { marsMIB 2 }marsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The objects defined in this table are used for the management of MARS servers." ::= { marsObjects 1 }marsEntry OBJECT-TYPE
SYNTAX MarsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains a MARS and its associated attributes." INDEX { marsIndex, marsIfIndex } ::= { marsTable 1 }MarsEntry ::=
SEQUENCE { marsIndex Integer32, marsIfIndex InterfaceIndex, marsAddr AtmAddr, marsLocal TruthValue, marsServStatus INTEGER, marsServType INTEGER, marsServPriority Unsigned32, marsRedirMapMsgTimer INTEGER, marsCsn Unsigned32, marsSsn Unsigned32, marsRowStatus RowStatus }marsIndex OBJECT-TYPE
SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used to identify instances of the columnar objects in the MARS table." ::= { marsEntry 1 }marsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the interface that the MARS is associated with." ::= { marsEntry 2 }marsAddr OBJECT-TYPE
SYNTAX AtmAddr MAX-ACCESS read-create STATUS current DESCRIPTION "The ATM address associated with the MARS." ::= { marsEntry 3 }marsLocal OBJECT-TYPE
SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A flag associated with a MARS entry. The object has the value of true (1) if the MARS whose interface is local to the machine that implements this MIB; otherwise the object has the value of false (2)." ::= { marsEntry 4 }marsServStatus OBJECT-TYPE
SYNTAX INTEGER { active (1), inactive (2), faulted (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The current status of MARS." ::= { marsEntry 5 } marsServType OBJECT-TYPE SYNTAX INTEGER { primary (1), backup (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Types of MARS servers: primary or backup." ::= { marsEntry 6 }marsServPriority OBJECT-TYPE
SYNTAX Unsigned32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Priority associated with a backup MARS server. A backup MARS server with lower priority value indicates a higher preference than other backup MARS servers to be used as the MARS server when the primary server fails." ::= { marsEntry 7 }marsRedirMapMsgTimer OBJECT-TYPE
SYNTAX INTEGER (1..2) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "Periodic interval on which a multi-part MARS_REDIRECT_MAP is sent from this MARS." DEFVAL { 1 } ::= { marsEntry 8 }marsCsn OBJECT-TYPE
SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Current cluster sequence number (CSN) which is global within the context of a given protocol. The CSN is incremented by the MARS on every transmission of a message on ClusterControlVC. A cluster member uses the CSN to track the message loss on ClusterControlVC or to monitor a membership change." ::= { marsEntry 9 }marsSsn OBJECT-TYPE
SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Current server sequence number (SSN) which is global within the context of a given protocol. The SSN is incremented by the MARS on every transmission of a message on ServerControlVC. A MCS uses the SSN to track the message loss on ServerControlVC or to monitor a membership change." ::= { marsEntry 10 }marsRowStatus OBJECT-TYPE
SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to create, delete or modify a row in this table.-
-
A row cannot be made 'active' until instances of all corresponding columns in the row of this table are appropriately configured and until the agent
has also created a corresponding row in the marsStatTable.
-
-
When this object has a value of 'active', the
following columnar objects can not be modified:
-
marsAddr, marsAddrLocal, marsServStatus, marsServType, marsCsn, marsSsn
while other objects in this conceptual row can be
modified irrespective of the value of this object.
-
Deletion of this row is allowed regardless of whether or not a row in any associated tables (i.e., marsVcTable) still exists or is in use. Once this row is deleted, it is recommended that the agent or the SNMP management station (if possible) through the set command deletes any stale rows that are associated with this row." ::= { marsEntry 11 } --**************************************************************** -- IP ATM MARS Multicast Group Address Object Definitions --****************************************************************marsMcGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsMcGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of IP multicast address blocks associated with a MARS. Entries in this table are used by the MARS host map table and the server map table. They should be created prior to being referenced as indices by those tables. Each row can be created or deleted via configuration." ::= { marsObjects 2 }marsMcGrpEntry OBJECT-TYPE
SYNTAX MarsMcGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a consecutive block of multicast group addresses." INDEX { marsIndex, marsIfIndex, marsMcMinGrpAddr, marsMcMaxGrpAddr } ::= { marsMcGrpTable 1 }MarsMcGrpEntry ::=
SEQUENCE { marsMcMinGrpAddr IpAddress, marsMcMaxGrpAddr IpAddress, marsMcGrpAddrUsage INTEGER, marsMcGrpRxLayer3GrpSets Counter32, marsMcGrpRxLayer3GrpResets Counter32, marsMcGrpRowStatus RowStatus }marsMcMinGrpAddr OBJECT-TYPE
SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Minimum multicast group address - the min and max multicast forms multi-group block. If the MinGrpAddr and MaxGrpAddr are the same, it indicates that this block contains a single group address." ::= { marsMcGrpEntry 1 }marsMcMaxGrpAddr OBJECT-TYPE
SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Maximum multicast group address - the min and max multicast forms a multi-group block. If The MinGrpAddr and MaxGrpAddr are the same, it indicates that this block contains a single group address." ::= { marsMcGrpEntry 2 }marsMcGrpAddrUsage OBJECT-TYPE
SYNTAX INTEGER { hostMap (1), serverMap (2), hostServerMap (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Usage of the multicast address block. The hostMap (1) indicates that the address block is only used in the MARS host map table. The serverMap (2) indicates that the address block is only used in the MARS server map table. The hostServerMap (3) indicates that the address block is used in both the host map and the server map tables." ::= { marsMcGrpEntry 3 }marsMcGrpRxLayer3GrpSets OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MARS_JOIN messages received with mars$flags.layer3grp flag set." ::= { marsMcGrpEntry 4 }marsMcGrpRxLayer3GrpResets OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MARS_JOIN messages received with mars$flags.layer3grp flag reset." ::= { marsMcGrpEntry 5 }marsMcGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to create, delete or modify a row in this table. The value of this object has no effect on whether other objects in this conceptual row can be modified." ::= { marsMcGrpEntry 6 } --*************************************************************** -- IP ATM MARS Host Map Object Definitions --***************************************************************marsHostMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsHostMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table caches mappings between IP multicast address to a list of ATM addresses that are configured or dynamically learned from the MARS. This address resolution is used for the host map. It supports the mapping of a block of multicast group addresses to a cluster member address. In the case where a group block is associated with multiple cluster members, several entries are used to representing the relationship." ::= { marsObjects 3 }marsHostMapEntry OBJECT-TYPE
SYNTAX MarsHostMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry row contains attributes associated with the mapping between a multicast group block and an ATM address." INDEX { marsIndex, marsIfIndex, marsMcMinGrpAddr, marsMcMaxGrpAddr, marsHostMapAtmAddr } ::= { marsHostMapTable 1 }MarsHostMapEntry ::=
SEQUENCE { marsHostMapAtmAddr AtmAddr, marsHostMapRowType INTEGER, marsHostMapRowStatus RowStatus }marsHostMapAtmAddr OBJECT-TYPE
SYNTAX AtmAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mapped cluster member ATM address." ::= { marsHostMapEntry 1 }marsHostMapRowType OBJECT-TYPE
SYNTAX INTEGER { static (1), dynamic (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Method in which this entry row is created. The static (1) indicates that this row is created through configuration. The dynamic (2) indicates that the row is created as the result of group address updates received at this MARS." ::= { marsHostMapEntry 2 }marsHostMapRowStatus OBJECT-TYPE
SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to create, delete or modify a row in this table.
This object must not be set to 'active' until
instances of all corresponding columns in the
row of this table are appropriately configured.
-
-
-
It is possible for an SNMP management station
to set the row to 'notInService' and modify
the entry and then set it back to 'active'
with the following exception. That is, rows
for which the corresponding instance of marsHostMapRowType has a value of 'dynamic'
-
can not be modified or deleted." ::= { marsHostMapEntry 3 } --*************************************************************** -- IP ATM MARS Server Map Object Definitions --***************************************************************marsServerMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsServerMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table caches mappings between IP multicast address to a list of MCS ATM addresses that are configured or dynamically learned from the MARS. This address resolution is used for the server map. It supports the mapping of a block of multicast group addresses to a MCS address. In the case where a group block is associated with multiple MCSs, several entries are used to representing the relationship." ::= { marsObjects 4 }marsServerMapEntry OBJECT-TYPE
SYNTAX MarsServerMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry row contains attributes associated with the mapping between a multicast group block and an MCS address." INDEX { marsIndex, marsIfIndex, marsMcMinGrpAddr, marsMcMaxGrpAddr, marsServerMapAtmAddr } ::= { marsServerMapTable 1 }MarsServerMapEntry ::=
SEQUENCE { marsServerMapAtmAddr AtmAddr, marsServerMapRowType INTEGER, marsServerMapRowStatus RowStatus }marsServerMapAtmAddr OBJECT-TYPE
SYNTAX AtmAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mapped MCS ATM address." ::= { marsServerMapEntry 1 }marsServerMapRowType OBJECT-TYPE
SYNTAX INTEGER { static (1), dynamic (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Method in which this entry row is created. The 'static (1)' indicates that this row is created through configuration. The 'dynamic (2)' indicates that the row is created as the result of group address updates received at this MARS." ::= { marsServerMapEntry 2 }marsServerMapRowStatus OBJECT-TYPE
SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to create, delete or modify a row in this table. -
This object must not be set to 'active' until
instances of all corresponding columns in the
row of this table are appropriately configured.
-
It is possible for an SNMP management station to set the row to 'notInService' and modify the entry and then set it back to 'active' with the following exception. That is, rows for which the corresponding instance of marsServerMapRowType has a value of 'dynamic' can not be modified or deleted." ::= { marsServerMapEntry 3 } --*************************************************************** -- IP ATM MARS VC Object Definition Table --***************************************************************marsVcTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsVcEntry MAX-ACCESS not-accessible-
STATUS current
DESCRIPTION-
"This table contains information about open virtual circuits
-
(VCs) that a MARS has. For point to point circuit, each entry represents a single VC connection between this MARS ATM address to another party's ATM address. In the case of point to multipoint connection where a ControlVc is attached with multiple leaf nodes, several entries are used to represent the relationship. An example of point to multi-point VC represented in a table is shown below. MARS VPI/VCI MARS Addr Party Addr 1 0,1 m1 p1 1 0,1 m1 p2 1 0,1 m1 p3" ::= { marsObjects 5 }marsVcEntry OBJECT-TYPE
SYNTAX MarsVcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The objects contained in the entry are VC related attributes such as VC signalling type, control VC type, idle timer, negotiated MTU size, etc." INDEX { marsIndex, marsIfIndex, marsVcVpi, marsVcVci, marsVcPartyAddr } ::= { marsVcTable 1 }MarsVcEntry ::=
-
SEQUENCE {
marsVcVpi INTEGER, marsVcVci INTEGER, marsVcPartyAddr AtmAddr, marsVcPartyAddrType INTEGER, marsVcType INTEGER, marsVcCtrlType INTEGER, marsVcIdleTimer INTEGER, marsVcCmi INTEGER, marsVcEncapsType INTEGER, marsVcNegotiatedMtu INTEGER, marsVcRowStatus RowStatus } marsVcVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of virtual path identifier (VPI). Since a VPI can be numbered 0, this sub-index can take a value of 0." ::= { marsVcEntry 1 }marsVcVci OBJECT-TYPE
SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of virtual circuit identifier (VCI). Since a VCI can be numbered 0, this sub-index can take a value of 0." ::= { marsVcEntry 2 }marsVcPartyAddr OBJECT-TYPE
SYNTAX AtmAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "An ATM party address in which this VC is linked. The party type is identified by the marsVcPartyAddrType." ::= { marsVcEntry 5 }marsVcPartyAddrType OBJECT-TYPE
SYNTAX INTEGER { called (1), calling (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The party type is associated with the party address. The 'called (1)' indicates that the party address is a destination address which implies that VC is originated from this MARS. The 'calling (2)' indicates the VC was initiated externally to this MARS. The party address is the source address." ::= { marsVcEntry 6 }marsVcType OBJECT-TYPE
SYNTAX INTEGER { pvc (1), svc (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Circuit Connection type: permanent virtual circuit or switched virtual circuit." ::= { marsVcEntry 7 }marsVcCtrlType OBJECT-TYPE
SYNTAX INTEGER { pointToPointVC (1), clusterControlVC (2), serverControlVC (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Control VC type used to specify a particular connection. pointToPointVC (1): used by the ATM endpoints (clients) or the MCS for registration and queries. This VC is set up from a MARS client and MCS to this MARS. It is a bi-directional VC. clusterControlVC (2): used by MARS to issue asynchronous updates to ATM an ATM client. This VC is established from the MARs to the ATM client. serverControlVC (3): used by MARS to issue asynchronous update to ATM multicast servers. This type of VC exists when at least a MCS is being used." ::= { marsVcEntry 8 }marsVcIdleTimer OBJECT-TYPE
SYNTAX INTEGER (1..2147483647) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The idle timer associated with this VC. The minimum suggested value is 1 minute and the recommended default value is 20 minutes." DEFVAL { 20 } ::= { marsVcEntry 9 }marsVcCmi OBJECT-TYPE
SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Cluster member identifier (CMI) which uniquely identifies each endpoint attached to the cluster. This variable applies to each 'leaf node' of an outgoing control VC." ::= { marsVcEntry 10 }marsVcEncapsType OBJECT-TYPE
SYNTAX INTEGER { other (1), llcSnap (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The encapsulation type used when communicating over this VC." ::= { marsVcEntry 11 }marsVcNegotiatedMtu OBJECT-TYPE
SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The negotiated MTU when communicating over this VC." ::= { marsVcEntry 12 }marsVcRowStatus OBJECT-TYPE
SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to create, delete or modify a row in this table.
A row cannot be made 'active' until instances of
all corresponding columns in the row of this table
are appropriately configured.
-
-
-
While the marsVcIdleTimer in this conceptual
row can be modified irrespective of the value
of this object, all other objects in the row can
not be modified when this object has a value
of 'active'.It is possible for an SNMP management station
to set the row to 'notInService' and modify
the entry and then set it back to 'active'
-
with the following exception. That is, rows for which the corresponding instance of marsVcType has a value of 'svc' can not be modified or deleted." ::= { marsVcEntry 13 } --*************************************************************** -- IP ATM MARS Registered Cluster Member List Table --***************************************************************marsRegClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsRegClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains ATM identities of all the currently registered cluster members at a MARS. Each entry represents one set of ATM identities associated with one cluster member or the MARS client." ::= { marsObjects 6 }marsRegClientEntry OBJECT-TYPE
SYNTAX MarsRegClientEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry row contains attributes associated with one register cluster member." INDEX { marsIndex, marsIfIndex, marsRegClientCmi} ::= { marsRegClientTable 1 }MarsRegClientEntry ::=
SEQUENCE { marsRegClientCmi INTEGER, marsRegClientAtmAddr AtmAddr }marsRegClientCmi OBJECT-TYPE
SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This cluster member identifier is used as an auxiliary index for the entry in this table." ::= { marsRegClientEntry 1 }marsRegClientAtmAddr OBJECT-TYPE
SYNTAX AtmAddr MAX-ACCESS read-only STATUS current DESCRIPTION "The registered client's ATM address." ::= { marsRegClientEntry 2 } --*************************************************************** -- IP ATM MARS Registered Server Member List Table --***************************************************************marsRegMcsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsRegMcsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains ATM identities of all the currently registered MCSs at a MARS. Each entry represents one set of ATM identities associated with one MCS." ::= { marsObjects 7 }marsRegMcsEntry OBJECT-TYPE
SYNTAX MarsRegMcsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry row contains attributes associated with one registered MCS." INDEX { marsIndex, marsIfIndex, marsRegMcsAtmAddr } ::= { marsRegMcsTable 1 }MarsRegMcsEntry ::=
SEQUENCE { marsRegMcsAtmAddr AtmAddr }marsRegMcsAtmAddr OBJECT-TYPE
SYNTAX AtmAddr MAX-ACCESS read-only STATUS current DESCRIPTION "The registered MCS's ATM address." ::= { marsRegMcsEntry 1 } --*************************************************************** -- IP ATM MARS Statistics Object Definition Table --***************************************************************marsStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains statistics collected at MARS." ::= { marsObjects 8 }marsStatEntry OBJECT-TYPE
SYNTAX MarsStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains statistics collected at one MARS." INDEX { marsIndex, marsIfIndex } ::= { marsStatTable 1 }MarsStatEntry ::=
SEQUENCE { marsStatTxMultiMsgs Counter32, marsStatTxGrpLstRplyMsgs Counter32, marsStatTxRedirectMapMsgs Counter32, marsStatTxMigrateMsgs Counter32, marsStatTxNakMsgs Counter32, marsStatTxJoinMsgs Counter32, marsStatTxLeaveMsgs Counter32, marsStatTxSjoinMsgs Counter32, marsStatTxSleaveMsgs Counter32, marsStatTxMservMsgs Counter32, marsStatTxUnservMsgs Counter32, marsStatRxReqMsgs Counter32, marsStatRxGrpLstReqMsgs Counter32, marsStatRxJoinMsgs Counter32, marsStatRxLeaveMsgs Counter32, marsStatRxMservMsgs Counter32, marsStatRxUnservMsgs Counter32, marsStatRxBlkJoinMsgs Counter32, marsStatRegMemGroups Counter32, marsStatRegMcsGroups Counter32 } marsStatTxMultiMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_MULTI transmitted by this MARS." ::= { marsStatEntry 1 }marsStatTxGrpLstRplyMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_GROUPLIST_REPLY messages transmitted by this MARS." ::= { marsStatEntry 2 }marsStatTxRedirectMapMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_REDIRECT_MAP messages transmitted by this MARS." ::= { marsStatEntry 3 }marsStatTxMigrateMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_MIGRATE messages transmitted by this MARS." ::= { marsStatEntry 4 }marsStatTxNakMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_NAK messages transmitted by this MARS." ::= { marsStatEntry 5 }marsStatTxJoinMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_JOIN messages transmitted by this MARS." ::= { marsStatEntry 6 }marsStatTxLeaveMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_LEAVE messages transmitted by this MARS." ::= { marsStatEntry 7 }marsStatTxSjoinMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_SJOIN messages transmitted by this MARS." ::= { marsStatEntry 8 }marsStatTxSleaveMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_SLEAVE messages transmitted by this MARS." ::= { marsStatEntry 9 }marsStatTxMservMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_MSERV messages transmitted by this MARS." ::= { marsStatEntry 10 }marsStatTxUnservMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_UNSERV messages transmitted by this MARS." ::= { marsStatEntry 11 }marsStatRxReqMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_REQUEST messages received by this MARS." ::= { marsStatEntry 12 }marsStatRxGrpLstReqMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_GROUPLIST_REQUEST messages received by this MARS." ::= { marsStatEntry 13 }marsStatRxJoinMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_JOINS messages received by this MARS." ::= { marsStatEntry 14 }marsStatRxLeaveMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_LEAVES messages received by this MARS." ::= { marsStatEntry 15 }marsStatRxMservMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_MSERV messages received by this MARS." ::= { marsStatEntry 16 }marsStatRxUnservMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_UNSERV messages received by this MARS." ::= { marsStatEntry 17 }marsStatRxBlkJoinMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of block joins messages received by this MARS." ::= { marsStatEntry 18 }marsStatRegMemGroups OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of IP multicast groups with 1 or more joined cluster members." ::= { marsStatEntry 19 }marsStatRegMcsGroups OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of IP multicast groups with 1 or more joined MCSs." ::= { marsStatEntry 20 } --*************************************************************** -- IP ATM MARS MCS Object Definitions --*************************************************************** marsMcsObjects OBJECT IDENTIFIER ::= { marsMIB 3 }marsMcsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsMcsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The objects defined in this table are used for the management of a multicast server (MCS)." ::= { marsMcsObjects 1 }marsMcsEntry OBJECT-TYPE
SYNTAX MarsMcsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains a MCS and its associated attributes." INDEX { marsMcsIndex, marsMcsIfIndex } ::= { marsMcsTable 1 }MarsMcsEntry ::=
SEQUENCE { marsMcsIndex Integer32, marsMcsIfIndex InterfaceIndex, marsMcsAddr AtmAddr, marsMcsDefaultMarsAddr AtmAddr, marsMcsRegistration INTEGER, marsMcsSsn Unsigned32, marsMcsDefaultMtu INTEGER, marsMcsFailureTimer INTEGER, marsMcsRetranDelayTimer INTEGER, marsMcsRdmMulReqAddRetrTimer INTEGER, marsMcsRdmVcRevalidateTimer INTEGER, marsMcsRegisterRetrInterval INTEGER, marsMcsRegisterRetrLimit INTEGER, marsMcsRegWithMarsRdmTimer INTEGER, marsMcsForceWaitTimer INTEGER, marsMcsIdleTimer INTEGER, marsMcsLmtToMissRedirMapTimer INTEGER, marsMcsRowStatus RowStatus }marsMcsIndex OBJECT-TYPE
SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used to identify instances of the columnar objects in the MCS table." ::= { marsMcsEntry 1 }marsMcsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the interface that the MCS is associated with." ::= { marsMcsEntry 2 }marsMcsAddr OBJECT-TYPE
SYNTAX AtmAddr MAX-ACCESS read-create STATUS current DESCRIPTION "The ATM address associated with the MCS." ::= { marsMcsEntry 3 }marsMcsDefaultMarsAddr OBJECT-TYPE
SYNTAX AtmAddr MAX-ACCESS read-create STATUS current DESCRIPTION "The default MARS ATM address which is needed to setup the initial signalling path between a MCS and its associated MARS." ::= { marsMcsEntry 4 }marsMcsRegistration OBJECT-TYPE
SYNTAX INTEGER { notRegistered (1), registering (2), registered (3), reRegisteringFault (4), reRegisteringRedirMap (5) } MAX-ACCESS read-create STATUS current DESCRIPTION "An indication with regards to the registration STATUS of this MCS. The registration codes of 'notRegistered (1)', 'registered (2)', and registered (3) are self-explanatory. The 'reRegisteringFault (4)' indicates the MCS is in the process of re-registering with a MARS due to some fault conditions. The 'reRegisteringRedMap (5)' status code shows that MCS is re-registering because it has received a MARS_REDIRECT_MAP message and was told to register with a shift MARS." ::= { marsMcsEntry 5 }marsMcsSsn OBJECT-TYPE
SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The MCS own 32 bit Server Sequence Number. It is used to track the Mars sequence number." ::= { marsMcsEntry 6 } marsMcsDefaultMtu OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The default maximum transmission unit (MTU) used for this cluster. Note that the actual size used for a VC between two members of the cluster may be negotiated during connection setup and may be different than this value. Default value = 9180 bytes." DEFVAL { 9180 } ::= { marsMcsEntry 7 }marsMcsFailureTimer OBJECT-TYPE
SYNTAX INTEGER (1..2147483647) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "A timer used to flag the failure of last MARS_MULTI to arrive. Default value = 10 seconds (recommended)." DEFVAL { 10 } ::= { marsMcsEntry 8 }marsMcsRetranDelayTimer OBJECT-TYPE
SYNTAX INTEGER (5..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The delay timer for sending out new MARS_REQUEST for the group after the MCS learned that there is no other group in the cluster. The timer must be set between 5 and 10 seconds inclusive." ::= { marsMcsEntry 9 }marsMcsRdmMulReqAddRetrTimer OBJECT-TYPE
SYNTAX INTEGER (5..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The initial random L_MULTI_RQ/ADD retransmit timer which can be set between 5 and 10 seconds inclusive." ::= { marsMcsEntry 10 }marsMcsRdmVcRevalidateTimer OBJECT-TYPE
SYNTAX INTEGER (1..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The random time to set VC_revalidate flag. The timer value ranges between 1 and 10 seconds inclusive." ::= { marsMcsEntry 11 }marsMcsRegisterRetrInterval OBJECT-TYPE
SYNTAX INTEGER(5..2147483647) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "MARS_MSERV/UNSERV retransmit interval. The minimum and recommended values are 5 and 10 seconds, respectively." DEFVAL { 10 } ::= { marsMcsEntry 12 }marsMcsRegisterRetrLimit OBJECT-TYPE
SYNTAX INTEGER (0..5) MAX-ACCESS read-create STATUS current DESCRIPTION "MARS_MSERV/UNSERV retransmit limit. The maximum value is 5." ::= { marsMcsEntry 13 }marsMcsRegWithMarsRdmTimer OBJECT-TYPE
SYNTAX INTEGER (1..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Random time for a MCS to register with a MARS." ::= { marsMcsEntry 14 }marsMcsForceWaitTimer OBJECT-TYPE
SYNTAX INTEGER (1..2147483647) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "Force wait if MARS re-registration is looping. The minimum value is 1 minute." ::= { marsMcsEntry 15 }marsMcsLmtToMissRedirMapTimer OBJECT-TYPE
SYNTAX INTEGER (1..4) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Timer limit for MCS to miss MARS_REDIRECT_MAPS." ::= { marsMcsEntry 16 }marsMcsIdleTimer OBJECT-TYPE
SYNTAX INTEGER (1..2147483647) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The configurable inactivity timer associated with a MCS. When a VC is created at this MCS, it gets the idle timer value from this configurable timer. The minimum suggested value is 1 minute and the recommended default value is 20 minutes." DEFVAL { 20 } ::= { marsMcsEntry 17 }marsMcsRowStatus OBJECT-TYPE
SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to create, delete or modify a row in this table.-
-
A row cannot be made 'active' until instances of all corresponding columns in the row of this table are appropriately configured and until the agent
has also created a corresponding row in the marsMcsStatTable.
-
-
When this object has a value of 'active', the
following columnar objects can not be modified:
-
-
-
-
marsMcsDefaultMarsAddr,
marsMcsSsn,
marsMcsRegstration,
marsMcsDefaultMtu
-
-
-
while other objects in this conceptual row can be
modified irrespective of the value of this object.
-
Deletion of this row is allowed regardless of whether or not a row in any associated tables (i.e., marsMcsVcTable) still exists or is in use. Once this row is deleted, it is recommended that the agent or the SNMP management station (if possible) through the set command deletes any stale rows that are associated with this row." ::= { marsMcsEntry 18 } --**************************************************************** -- IP ATM MARS MCS Multicast Group Address Object Definitions --****************************************************************marsMcsMcGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsMcsMcGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of IP multicast group address blocks associated by a MARS MCS. The MCS uses the information contained in list to advertise its multicast group service to the MARS. Each row can be created or deleted via configuration." ::= { marsMcsObjects 2 }marsMcsMcGrpEntry OBJECT-TYPE
SYNTAX MarsMcsMcGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a consecutive block of multicast group addresses." INDEX { marsMcsIndex, marsMcsIfIndex, marsMcsMcMinGrpAddr, marsMcsMcMaxGrpAddr } ::= { marsMcsMcGrpTable 1 }MarsMcsMcGrpEntry ::=
SEQUENCE { marsMcsMcMinGrpAddr IpAddress, marsMcsMcMaxGrpAddr IpAddress, marsMcsMcGrpRowStatus RowStatus } marsMcsMcMinGrpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Minimum multicast group address - the min and max multicast forms multi-group block. If the MinGrpAddr and MaxGrpAddr are the same, it indicates that this block contains a single group address. Since the block joins are no allowed by a MCS as implied in the RFC2022, the MinGrpAddr and MaxGrpAddress should be set to the same value at this time when an entry row is created." ::= { marsMcsMcGrpEntry 1 }marsMcsMcMaxGrpAddr OBJECT-TYPE
SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Maximum multicast group address - the min and max multicast forms a multi-group block. If the MinGrpAddr and MaxGrpAddr are the same, it indicates that this block contains a single group address. Since the block joins are no allowed by a MCS as implied in the RFC2022, the MinGrpAddr and MaxGrpAddress should be set to the same value at this time when an entry row is created." ::= { marsMcsMcGrpEntry 2 }marsMcsMcGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to create or delete a row in this table. Since other objects in this row are not-accessible 'index-objects', the value of this object has no effect on whether those objects in this conceptual row can be modified." ::= { marsMcsMcGrpEntry 3 } --**************************************************************** -- IP ATM MARS MCS Backup MARS Object Definitions --**************************************************************** marsMcsBackupMarsTable OBJECT-TYPE SYNTAX SEQUENCE OF MarsMcsBackupMarsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of backup MARS addresses that a MCS can make contact to in case of failure for connecting to the primary server. The list of addresses is in descending order of preference. It should be noted that the backup list provided by the MARS to the MCS via the MARS_REDIRECT_MAP message has a higher preference than addresses that are manually configured into the MCS. When such a list is received from the MARS, this information should be inserted at the top of the list. Each row can be created or deleted via configuration." ::= { marsMcsObjects 3 }marsMcsBackupMarsEntry OBJECT-TYPE
SYNTAX MarsMcsBackupMarsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents an ATM address of a backup MARS." INDEX { marsMcsIndex, marsMcsIfIndex, marsMcsBackupMarsPriority, marsMcsBackupMarsAddr } ::= { marsMcsBackupMarsTable 1 }MarsMcsBackupMarsEntry ::=
SEQUENCE { marsMcsBackupMarsPriority Unsigned32, marsMcsBackupMarsAddr AtmAddr, marsMcsBackupMarsRowStatus RowStatus }marsMcsBackupMarsPriority OBJECT-TYPE
SYNTAX Unsigned32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority associated with a backup MARS. A lower priority value inidcates a higher preference." ::= { marsMcsBackupMarsEntry 1 }marsMcsBackupMarsAddr OBJECT-TYPE
SYNTAX AtmAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ATM address associated with a backup MARS." ::= { marsMcsBackupMarsEntry 2 }marsMcsBackupMarsRowStatus OBJECT-TYPE
SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to create or delete a row in this table. Since other objects in this row are not-accessible 'index-objects', the value of this object has no effect on whether those objects in this conceptual row can be modified." ::= { marsMcsBackupMarsEntry 3 } --*************************************************************** -- IP ATM MARS MCS VC Object Definition Table --***************************************************************marsMcsVcTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsMcsVcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about open virtual circuits (VCs) that a MCS has. For point to point circuit, each entry represents a single VC connection between this MCS ATM address to another party ATM address. In the case of point to multipoint connection where a single source address is associated with multiple destinations, several entries are used to represent the relationship. An example of point to multi-point VC represented in a table is shown below. MCS VPI/VCI Grp Addr1/Addr2 Part Addr 1 0,1 g1,g2 p1 1 0,1 g1,g2 p2 1 0,1 g1,g2 p3" ::= { marsMcsObjects 4 }marsMcsVcEntry OBJECT-TYPE
SYNTAX MarsMcsVcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The objects contained in the entry are VC related attributes such as VC signalling type, control VC type, idle timer, negotiated MTU size, etc." INDEX { marsMcsIndex, marsMcsIfIndex, marsMcsVcVpi, marsMcsVcVci, marsMcsVcMinGrpAddr, marsMcsVcMaxGrpAddr, marsMcsVcPartyAddr } ::= { marsMcsVcTable 1 }MarsMcsVcEntry ::=
SEQUENCE { marsMcsVcVpi INTEGER, marsMcsVcVci INTEGER, marsMcsVcMinGrpAddr IpAddress, marsMcsVcMaxGrpAddr IpAddress, marsMcsVcPartyAddr AtmAddr, marsMcsVcPartyAddrType INTEGER, marsMcsVcType INTEGER, marsMcsVcCtrlType INTEGER, marsMcsVcIdleTimer INTEGER, marsMcsVcRevalidate TruthValue, marsMcsVcEncapsType INTEGER, marsMcsVcNegotiatedMtu INTEGER, marsMcsVcRowStatus RowStatus }marsMcsVcVpi OBJECT-TYPE
SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of virtual path identifier (VPI). Since a VPI can be numbered 0, this sub-index can take a value of 0." ::= { marsMcsVcEntry 1 }marsMcsVcVci OBJECT-TYPE
SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of virtual circuit identifier (VCI). Since a VCI can be numbered 0, this sub-index can take a value of 0." ::= { marsMcsVcEntry 2 }marsMcsVcMinGrpAddr OBJECT-TYPE
SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Minimum IP multicast group address - the min and max multicast forms a multi-group block which is associated with a VC. If the MinGrpAddr and MaxGrpAddr are the same, it indicates that the size of multi-group block is 1, a single IP group." ::= { marsMcsVcEntry 3 } marsMcsVcMaxGrpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Maximum IP multicast group address - the min and max multicast forms a multi-group block which is associated with a VC. If the MinGrpAddr and MaxGrpAddr are the same, it indicates that the size of multi-group block is 1, a single IP group." ::= { marsMcsVcEntry 4 }marsMcsVcPartyAddr OBJECT-TYPE
SYNTAX AtmAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "An ATM party address in which this VC is linked. The party type is identified by the marsMcsVcPartyAddrType." ::= { marsMcsVcEntry 5 }marsMcsVcPartyAddrType OBJECT-TYPE
SYNTAX INTEGER { called (1), calling (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The party type is associated with the party address. The called (1) indicates that the party address is a destination address which implies that VC is originated from this MCS. The calling (2) indicates the VC was initiated externally to this MCS. In this case, the party address is the source address." ::= { marsMcsVcEntry 6 }marsMcsVcType OBJECT-TYPE
SYNTAX INTEGER { pvc (1), svc (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Circuit Connection type: permanent virtual circuit or switched virtual circuit." ::= { marsMcsVcEntry 7 }marsMcsVcCtrlType OBJECT-TYPE
SYNTAX INTEGER { pointToPointVC (1), serverControlVC (2), pointToMultiPointVC (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Control VC type used to specify a particular connection. pointToPointVC (1): used by the ATM Clients for the registration and queries. This VC or the initial signalling path is set up from the source MCS to a MARS. It is bi-directional. serverControlVC (2): used by a MARS to issue asynchronous updates to an ATM Client. This VC is established from the MARS to the MCS. pointToMultiPointVC (3): used by the client to transfer multicast data packets from layer 3. This VC is established from this VC to a cluster member." ::= { marsMcsVcEntry 8 }marsMcsVcIdleTimer OBJECT-TYPE
SYNTAX INTEGER (1..2147483647) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The idle timer associated with this VC. The minimum suggested value is 1 minute and the recommended default value is 20 minutes." DEFVAL { 20 } ::= { marsMcsVcEntry 9 }marsMcsVcRevalidate OBJECT-TYPE
SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A flag associated with an open and active multipoint VC. It is checked every time a packet is queued for transmission on that VC. The object has the value of true (1) if revalidate is required and the value false (2) otherwise." ::= { marsMcsVcEntry 10 }marsMcsVcEncapsType OBJECT-TYPE
SYNTAX INTEGER { other (1), llcSnap (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The encapsulation type used when communicating over this VC." ::= { marsMcsVcEntry 11 }marsMcsVcNegotiatedMtu OBJECT-TYPE
SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The negotiated MTU when communicating over this VC." ::= { marsMcsVcEntry 12 }marsMcsVcRowStatus OBJECT-TYPE
SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The object is used to create, delete or modify a row in this table.
A row cannot be made 'active' until instances of
all corresponding columns in the row of this table
are appropriately configured.
-
-
-
While objects: marsMcsVcIdleTimer and marsMcsVcRevalidate in this conceptual row can be modified irrespective of the value of this
object, all other objects in the row can not be modified when this object has a value of 'active'.
-
It is possible for an SNMP management station to set the row to 'notInService' and modify the entry and then set it back to 'active' with the following exception. That is, rows for which the corresponding instance of marsMcsVcType has a value of 'svc' can not be modified or deleted." ::= { marsMcsVcEntry 13 } --*************************************************************** -- IP ATM MARS MCS Statistics Definition Table --***************************************************************marsMcsStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF MarsMcsStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains statistics collected at MARS MCSs." ::= { marsMcsObjects 5 }marsMcsStatEntry OBJECT-TYPE
SYNTAX MarsMcsStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains statistics collected at one MARS MCS." INDEX { marsMcsIndex, marsMcsIfIndex } ::= { marsMcsStatTable 1 }MarsMcsStatEntry ::=
-
SEQUENCE {
marsMcsStatTxReqMsgs Counter32, marsMcsStatTxMservMsgs Counter32, marsMcsStatTxUnservMsgs Counter32, marsMcsStatRxMultiMsgs Counter32, marsMcsStatRxSjoinMsgs Counter32, marsMcsStatRxSleaveMsgs Counter32, marsMcsStatRxNakMsgs Counter32, marsMcsStatRxMigrateMsgs Counter32, marsMcsStatFailMultiMsgs Counter32 }marsMcsStatTxReqMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_REQUEST messages transmitted from this MCS." ::= { marsMcsStatEntry 1 }marsMcsStatTxMservMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_MSERV messages transmitted from this MCS." ::= { marsMcsStatEntry 2 }marsMcsStatTxUnservMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_UNSERV messages transmitted from this MCS." ::= { marsMcsStatEntry 3 }marsMcsStatRxMultiMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_MULTI messages received by this MCS." ::= { marsMcsStatEntry 4 }marsMcsStatRxSjoinMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_SJOIN messages received by this MCS." ::= { marsMcsStatEntry 5 }marsMcsStatRxSleaveMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_SLEAVE messages received by this MCS." ::= { marsMcsStatEntry 6 }marsMcsStatRxNakMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_NAK messages received by this MCS." ::= { marsMcsStatEntry 7 }marsMcsStatRxMigrateMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of MARS_MIGRATE messages received by this MCS." ::= { marsMcsStatEntry 8 }marsMcsStatFailMultiMsgs OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of timeouts occurred indicating failure of the last MARS_MULTI to arrive." ::= { marsMcsStatEntry 9 } --*************************************************************** -- IP ATM MARS Notification Definitions --*************************************************************** marsTrapInfo OBJECT IDENTIFIER ::= { marsMIB 0 }marsFaultTrap NOTIFICATION-TYPE
-
OBJECTS {
-
marsAddr,
marsServStatus } STATUS current DESCRIPTION "This trap/inform is sent to the manager whenever there is a fault condition occurred on a MARS." ::= { marsTrapInfo 1 } --*************************************************************** -- IP ATM MARS Conformance Definitions --*************************************************************** marsConformance OBJECT IDENTIFIER ::= { marsMIB 4 } marsClientConformance OBJECT IDENTIFIER ::= { marsConformance 1 } marsServerConformance OBJECT IDENTIFIER ::= { marsConformance 2 } marsMcsConformance OBJECT IDENTIFIER ::= { marsConformance 3 } marsClientCompliances OBJECT IDENTIFIER ::= { marsClientConformance 1 } marsClientGroups OBJECT IDENTIFIER ::= { marsClientConformance 2 } marsServerCompliances OBJECT IDENTIFIER ::= { marsServerConformance 1 } marsServerGroups OBJECT IDENTIFIER ::= { marsServerConformance 2 } marsMcsCompliances OBJECT IDENTIFIER ::= { marsMcsConformance 1 } marsMcsGroups OBJECT IDENTIFIER ::= { marsMcsConformance 2 } --*************************************************************** -- MARS Client Compliance Statements --***************************************************************marsClientCompliance MODULE-COMPLIANCE
STATUS current DESCRIPTION "The compliance statement for entities that are required for the management of MARS clients." MODULE MANDATORY-GROUPS { marsClientGroup } OBJECT marsClientAddr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientDefaultMarsAddr-
MIN-ACCESS read-only
DESCRIPTION-
"Write access is not required."
-
OBJECT marsClientHsn MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientRegistration MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientCmi MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientDefaultMtu MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientFailureTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientRetranDelayTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientRdmMulReqAddRetrTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientRdmVcRevalidateTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientJoinLeaveRetrInterval MIN-ACCESS read-only DESCRIPTION-
-
"Write access is not required."
-
OBJECT marsClientJoinLeaveRetrLimit MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientRegWithMarsRdmTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientForceWaitTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientLmtToMissRedirMapTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientIdleTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientMcGrpRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientBackupMarsRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientVcType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientVcCtrlType-
MIN-ACCESS read-only
DESCRIPTION-
"Write access is not required."
-
OBJECT marsClientVcIdleTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientVcRevalidate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientVcEncapsType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientVcNegotiatedMtu MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsClientVcRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { marsClientCompliances 1 }marsClientGroup OBJECT-GROUP
-
OBJECTS {
marsClientAddr, marsClientDefaultMarsAddr, marsClientHsn, marsClientRegistration, marsClientCmi, marsClientDefaultMtu, marsClientFailureTimer, marsClientRetranDelayTimer, marsClientRdmMulReqAddRetrTimer, marsClientRdmVcRevalidateTimer, marsClientJoinLeaveRetrInterval, marsClientJoinLeaveRetrLimit, marsClientRegWithMarsRdmTimer, marsClientForceWaitTimer, marsClientIdleTimer, marsClientLmtToMissRedirMapTimer, marsClientRowStatus, marsClientMcGrpRowStatus, marsClientBackupMarsRowStatus, marsClientVcPartyAddrType, marsClientVcType, marsClientVcCtrlType, marsClientVcIdleTimer, marsClientVcRevalidate, marsClientVcEncapsType, marsClientVcNegotiatedMtu, marsClientVcRowStatus, marsClientStatTxReqMsgs, marsClientStatTxJoinMsgs, marsClientStatTxLeaveMsgs, marsClientStatTxGrpLstReqMsgs, marsClientStatRxJoinMsgs, marsClientStatRxLeaveMsgs, marsClientStatRxMultiMsgs, marsClientStatRxNakMsgs, marsClientStatRxGrpLstRplyMsgs, marsClientStatRxMigrateMsgs, marsClientStatFailMultiMsgs } STATUS current DESCRIPTION "A collection of objects to be implemented in a MIB for the management of MARS clients." ::= { marsClientGroups 1 } --*************************************************************** -- MARS Server Compliance Statements --***************************************************************marsServerCompliance MODULE-COMPLIANCE
STATUS current DESCRIPTION "The compliance statement for entities that are required for the management of MARS servers." MODULE -- this module MANDATORY-GROUPS { marsServerGroup, marsServerEventGroup } OBJECT marsAddr MIN-ACCESS read-only DESCRIPTION-
-
"Write access is not required."
-
OBJECT marsLocal MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsServStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsServType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsServPriority MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsRedirMapMsgTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsCsn MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsSsn MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcGrpAddrUsage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcGrpRowStatus-
MIN-ACCESS read-only
DESCRIPTION-
"Write access is not required."
-
OBJECT marsHostMapRowType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsHostMapRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsServerMapRowType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsServerMapRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsVcPartyAddrType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsVcType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsVcCtrlType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsVcIdleTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsVcCmi MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsVcEncapsType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsVcNegotiatedMtu MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsVcRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { marsServerCompliances 1 }marsServerGroup OBJECT-GROUP
-
-
OBJECTS {
-
marsAddr, marsLocal, marsServStatus, marsServType, marsServPriority, marsRedirMapMsgTimer, marsCsn, marsSsn, marsRowStatus, marsMcGrpAddrUsage, marsMcGrpRxLayer3GrpSets, marsMcGrpRxLayer3GrpResets, marsMcGrpRowStatus, marsHostMapRowType, marsHostMapRowStatus, marsServerMapRowType, marsServerMapRowStatus, marsVcPartyAddrType, marsVcType, marsVcCtrlType, marsVcIdleTimer, marsVcCmi, marsVcEncapsType, marsVcNegotiatedMtu, marsVcRowStatus, marsRegClientAtmAddr, marsRegMcsAtmAddr, marsStatTxMultiMsgs, marsStatTxGrpLstRplyMsgs, marsStatTxRedirectMapMsgs, marsStatTxMigrateMsgs, marsStatTxNakMsgs, marsStatTxJoinMsgs, marsStatTxLeaveMsgs, marsStatTxSjoinMsgs, marsStatTxSleaveMsgs, marsStatTxMservMsgs, marsStatTxUnservMsgs, marsStatRxReqMsgs, marsStatRxGrpLstReqMsgs, marsStatRxJoinMsgs, marsStatRxLeaveMsgs, marsStatRxMservMsgs, marsStatRxUnservMsgs, marsStatRxBlkJoinMsgs, marsStatRegMemGroups, marsStatRegMcsGroups } STATUS current DESCRIPTION "A collection of objects to be implemented in a MIB for the management of MARS servers." ::= { marsServerGroups 1 }marsServerEventGroup NOTIFICATION-GROUP
NOTIFICATIONS { marsFaultTrap } STATUS current DESCRIPTION "A collection of events that can be generated from a MARS server." ::= { marsServerGroups 2 } --*************************************************************** -- MARS Multicast Server (MCS) Compliance Statements --***************************************************************marsMcsCompliance MODULE-COMPLIANCE
STATUS current DESCRIPTION "The compliance statement for entities that are required for the management of MARS multicast servers (MCS)." MODULE MANDATORY-GROUPS { marsMcsGroup } OBJECT marsMcsAddr-
MIN-ACCESS read-only
DESCRIPTION-
"Write access is not required."
-
OBJECT marsMcsDefaultMarsAddr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsRegistration MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsSsn MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsDefaultMtu MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsFailureTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsRetranDelayTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsRdmMulReqAddRetrTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsRdmVcRevalidateTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsRegisterRetrInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsRegisterRetrLimit MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsForceWaitTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsLmtToMissRedirMapTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsIdleTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsMcGrpRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsBackupMarsRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsVcPartyAddrType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsVcType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsVcCtrlType MIN-ACCESS read-only DESCRIPTION-
-
"Write access is not required."
-
OBJECT marsMcsVcIdleTimer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsVcRevalidate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsVcEncapsType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsVcNegotiatedMtu MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT marsMcsVcRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { marsMcsCompliances 1 }marsMcsGroup OBJECT-GROUP
-
OBJECTS {
marsMcsAddr, marsMcsDefaultMarsAddr, marsMcsRegistration, marsMcsSsn , marsMcsDefaultMtu, marsMcsFailureTimer, marsMcsRetranDelayTimer, marsMcsRdmMulReqAddRetrTimer, marsMcsRdmVcRevalidateTimer, marsMcsRegisterRetrInterval, marsMcsRegisterRetrLimit, marsMcsRegWithMarsRdmTimer, marsMcsForceWaitTimer, marsMcsIdleTimer, marsMcsLmtToMissRedirMapTimer, marsMcsRowStatus, marsMcsMcGrpRowStatus, marsMcsVcPartyAddrType, marsMcsBackupMarsRowStatus, marsMcsVcType, marsMcsVcCtrlType, marsMcsVcIdleTimer, marsMcsVcRevalidate, marsMcsVcEncapsType, marsMcsVcNegotiatedMtu, marsMcsVcRowStatus, marsMcsStatTxReqMsgs, marsMcsStatTxMservMsgs, marsMcsStatTxUnservMsgs, marsMcsStatRxMultiMsgs, marsMcsStatRxSjoinMsgs, marsMcsStatRxSleaveMsgs, marsMcsStatRxNakMsgs, marsMcsStatRxMigrateMsgs, marsMcsStatFailMultiMsgs } STATUS current DESCRIPTION "A collection of objects to be implemented in a MIB for the management of MARS multicast servers (MCS)." ::= { marsMcsGroups 1 } END -
4. Acknowledgments
-
This document is a product of the IETF's Internetworking Over NBMA Networks (ion) Working Group.
The author would like to recognize Grenville Armitage (Bellcore), Ken Carlberg (SAIC), Ramesh Uppuluri (Fore Systems), and Radha Gowda (SYNNET), and Bill Willcox (Fujitsu Nexion) for their support and comments in completing the MARS MIB. Also thanks to Bert Wijnen (IBM) for his thorough review of the MARS MIB.
5. References
-
[1] Armitage, G., "Support for Multicast over UNI 3.0/3.1 based ATM Networks.", RFC 2022, November 1996. [2] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Structure of Management Information for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC1902, January 1996. [3] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Textual Conventions for Version 2 of the of the Simple Network Management Protocol (SNMPv2)", RFC 1903, January 1996. [4] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Conformance Statements for Version 2 of the of the Simple Network Management Protocol (SNMPv2)", RFC 1904, January 1996. [5] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple Network Management Protocol", RFC 1157, May 1990. [6] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1905, January 1996. [7] McCloghrie, K., and M. Rose, Editors, "Management Information Base for Network Management of TCP/IP-based internets: MIB-II", STD 17, RFC 1213, March 1991. [8] SNMPv3 Working Group, Blumenthal, U., and B. Wijnen, "User-based Security Model (USM) for version 3 of Simple Network Management Protocol (SNMPv3)", RFC 2274, January 1998. [9] SNMPv3 Working Group, Wijnen, B., Presuhn, R., and K. McCloghire, "View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)", RFC 2275, January 1998.
6. Security Considerations
-
There are a number of management objects defined in this MIB that have a MAX-ACCESS clause of read-write and/or read-create. Such object may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations.
SNMPv1 by itself is such an insecure environment. Even if the network itself is secure (for example by using IPSec), even then, there is no control as to who on the secure network is allowed to access and SET (change/create/delete) the objects in this MIB.
It is recommended that the implementers consider the security features as provided by the SNMPv3 framework. Specifically, the use of the User-based Security Model RFC 2274 [8] and the View-based Access Control Model RFC 2275 [9] is recommended.
It is then a customer/user responsibility to ensure that the SNMP entity giving access to this MIB, is properly configured to give access to those objects only to those principals (users) that have a legitimate rights to indeed SET (change/create/delete) them.
Note:
-
-
read-access in fact may also need access-control.
-
7. Authors' Addresses
-
Chris Chung Science Applications International Corp. (SAIC) 1710 Goodridge Drive Mail Stop 1-4-7 McLean, VA 22102 Phone: (703) 448-6485 EMail: cchung@tieo.saic.com Maria Greene (editor) Independent Contractor E-mail: maria@xedia.com
8. Full Copyright Statement
-
Copyright © The Internet Society (1998). All Rights Reserved.
This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English.
The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.